Optimol in Science
List of publications on the use of the SRV® Test System, 2disk and ETS
1. ADDITIVES
Soluble Molybdenum Compound and Sulphur Containing EP Additives Combinations: Synergistic and Adverse Effects on Antifriction and Antiwear Characteristics
R. Sarin, A. K. Gupta, V. Martin, A. V. Sereshbabu, A. K. Misra, A. K. Bhatnagar, (Indian Oil Corporation)
https://www.sciencedirect.com/science/article/abs/pii/0043164894900906Surface Reaction Behavior of Isogeometrical Phosphorus Compounds
R. Schumacher, H. Zinke, D. Landolt, H.J. Mathieu, (Swiss Federal Institute of Technology,Ciba-Geigy AG)
https://www.tandfonline.com/doi/abs/10.1080/05698198308981482Improvement of Lubrication Breakdown Behaviour by Isogeometrical Phosphorous Compounds
R. Schumacher, H. Zinke, D. Landolt, H. J. Mathieu, (Ciba-Geigy,Swiss Federal Institute of Technology)
https://www.sciencedirect.com/science/article/abs/pii/004316489190221FCompetitive Surface Interactions of Critical Additives Interacted with Piston Ring/Cylinder Liner Components Under Lubricated Running-In Conditions
Shengua Li, Ruijun Zhang, Yuansheng Jin, Yucong Wang, Simon C. Tung, (Tsinghua University,General Motors Corp.)
https://www.tandfonline.com/doi/abs/10.1080/10402000308982617MoS2 und SnS2 als Festschmierstoffe im Vergleich
Dr. Matthias Weiß, Dipl.-Ing. (FH) Markus Grebe, Prof. Dr. Ing. Paul Feinle, (Goldschmidt TIB GmbH, Fachhochschule Mannheim – Institut für Tribologie)
https://www.researchgate.net/publication/200084430_Comparison_of_MoS2_and_SnS2_as_solid_lubricantsFuel Efficiency of SAE 5W-20 Friction Modified Gasoline Engine Oil
Kohkichi Hoshino, Hiromi Kawal, Kenyu Akiyama, (Toyota Motor Corporation)
https://www.sae.org/publications/technical-papers/content/982506/
https://saemobilus.sae.org/papers/fuel-efficiency-sae-5w-20-friction-modified-gasoline-engine-oil-982506#view
https://tdl.libra.titech.ac.jp/journaldocs/en/recordID/article.bib-02/ZR000000066448Tribological performance of some organic fluorine-containing compounds as lubricants
Weimin Liu, Chengfeng Ye, Qunji Xue, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences)
https://koreascience.kr/article/CFKO200236037346299.doFriction and wear behaviour of nodular cast iron modified by a laser micro-precision treatment sliding against steel under the lubrication of liquid paraffin containing various additives
Yan-qiu Xia, Wie-min Liu, Qun-ji Xue, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences)
https://www.sciencedirect.com/science/article/abs/pii/S004314802001503Tribological performances of heterocyclic-containing ether and/or thioether as additives in the synthetic diester
Peipei Liang, Hua Wu, Guangzhi Zuo, Tianhui Ren, (School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University)
https://onlinelibrary.wiley.com/doi/abs/10.1002/ls.76Sliding friction and wear behaviours of surface-coated natural serpentine mineral powders as lubricant additive
Baosen Zhang, Yi Xu, Fei Gao, Peijing Shi, Binshi Xu, Yixiong Wu, (Shanghai Key Laboratory of Laser Processing and Materials Modification, Shanghai Jiaotong University, National Key Laboratory for Remanufacturing)
https://www.sciencedirect.com/science/article/abs/pii/S0169433210013851Anticorrosion imidazolium ionic liquids as the additive in poly(ethylene glycol) for steel/Cu-Sn alloy contacts
Meirong Cai, Yongmin Liang, Weimin Liu, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Lanzhou,Graduate School of Chinese Academy of Sciences, Beijing)
https://pubs.rsc.org/en/content/articlelanding/2012/fd/c2fd00124a
https://pubmed.ncbi.nlm.nih.gov/23285627/Influence of oil with MKF-18 additive on the weak resistance of friction pairs
E.B. Ivankina, N.G. Kozhaeva, S.V. Obraztsov, I.A. Gavrilova, E.G. Makhovkin, S.V. Ledjyaev, (All-Union Scientific-Research Institute for Petroleum Processing)
https://link.springer.com/article/10.1007/BF00718797Tribological properties of crown-type phosphate ionic liquids as lubricating additives in rapeseed oils
Dong Jiang, Litian Hu, Dapeng Feng, (State Key Laboratory of Solid lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, Graduate University of Chinese Academy of Sciences, Beijing)
https://onlinelibrary.wiley.com/doi/10.1002/ls.1199
https://www.emerald.com/insight/content/doi/10.1108/00368791311311204/full/htmlTribochemical Transformation of Nano TiO2 to Ilmenite on the Surface of Wearing Steel Parts: Antiwear Action of Nano TiO2 as an Additive on Engine Oil
M. Vijayaraj, S.K. Hait, A.K. Harinarain, S.S.V. Ramakumar, (Nanotechnology Department – Indian Oil Corporation Limited, India)
https://www.tandfonline.com/doi/full/10.1080/10402004.2015.1079670
https://figshare.com/collections/Tribochemical_Transformation_of_Nano_iO_sub_2_sub_to_Ilmenite_on_the_Surface_of_Wearing_Steel_Parts_Antiwear_Action_of_Nano_TiO_sub_2_sub_as_an_Additive_in_Engine_Oil/2113529/2Tribological Properties of Three S-Alkyl-N, N-dicarboxymethyl Dithiocarbamates as Additives in Water-Glycol Hydraulic Fluid
Junming Wang, Chao Xu, Jianhua Wang, Chunsheng Li, Gaoqing Zhao, Xiaobo Wang, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China)
https://www.tandfonline.com/doi/full/10.1080/10402004.2012.748234Lanthanum Effect on the Tribological Behaviors of Natural Serpentine as Lubricant Additive
Bao-Sen Zhang, Bin-Shi Xu, Yi Xu, Zhi-Xin Ba, Zhang-Zhong Wang, (School of Materials Engineering – Nanjing Institute of Technology, China & National Key Laboratory for Remanufacturing, China)
https://www.tandfonline.com/doi/full/10.1080/10402004.2012.758332Friction and Wear Properties of Cyanex 302-Modified MoS2 Micro-Sized Spheres as Additive in Liquid Paraffin
Xiaodong Zhou, Huaqiang Shi, Shaoling Zhang, Xun Fu, Xiaobo Wang, (Qingdao University of Science and Technology, China,State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Science, China)
https://www.tandfonline.com/doi/full/10.1080/10402000802011794Effects of MoS2 on the Life of Heavily Loaded Rolling Element Bearings
B.T. Kuhnell, J.S. Stecki, (Monash University, Australia)
https://www.tandfonline.com/doi/abs/10.1080/10402008808981830Synthesis, Characterization, and Tribological Behavior of Oleic Acid-Capped Calcium Borate Hydrate
Zhengfeng Jia, Yuchan Su, Yangqin Xia, Xin Shao, Yanxin Song, Junjie Ni, Jie Ma, (School of Materials Science and Engineering – Central South University, China,State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,College of Materials Science and Engineering – Liaocheng University, China)
https://www.tandfonline.com/doi/full/10.1080/10402004.2013.763392
https://www.emerald.com/insight/content/doi/10.1108/ILT-06-2011-0041/full/html
https://dl.acm.org/doi/10.1155/2014/654145
https://onlinelibrary.wiley.com/doi/epdf/10.1155/2014/654145Tribochemical interactions between Zndtp, Modtc and calcium borate
Carol Grossiord, Jean-Michel Martin, Béatrice Vacher, Thierry Le Mogne, Karine Varlot, Yasuhisa Yamada, (Ecole Centrale de Lyon, Laboratoire de Tribologie at Dynamiques des Systèmes, France,GEMPPM, INSA Lyon, France,Nippon Mitsubishi Oil Corporation, Japan)
https://link.springer.com/article/10.1023/A:1019155822710Multilayer Graphene as a Lubricating Additive in Bentone Greases
Xiaoqiang Fan, Yanqiu Xia, Liping Wang, Wen Li, (State Key Laboratory of Solid Lubrications – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,University of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-014-0369-1Tribological Study of Boron-Containing Soybean Lecithin as Environmentally Friendly Lubricant Additive in Synthetic Base Fluids
Weimin Li, Yanxia Wu, Xiaobo Wang, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,Graduate University of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-012-9994-8Tribological Behaviors of Different Diamond-Like Carbon Coatings on Nitrided Mild Steel Lubricated With Benzotriazole-Containing Borate Esters
Zhengfeng Jia, Yanqiu Xia, Xianjuan Pang, Junying Hao, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,College of Material Science and Engineering – Liaocheng University, China)
https://link.springer.com/article/10.1007/s11249-010-9706-1Fluorinated Candle Soot as the Lubricant Additive of Perfluoropolyether
Guowei Huang, Qiangliang Yu, Zhengfeng Ma, Meirong Cai, Feng Zhou, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,University of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-017-0812-1Synergistic effects of MoDTC and ZDTP on frictional behaviour of tribofilms at the nanometer scale
S. Bec, A. Tonck, J.M. Georges, G.W. Roper, (Laboratoire de Tribologie at Dynamique des Systèmes – Ecole Centrale de Lyon, France,Lubricants Technology Department – Shell Global Solutions UK)
https://link.springer.com/article/10.1007/s11249-004-8088-7
https://arxiv.org/pdf/0704.0338Tribological Investigation of Two Different Layered Zirconium Phosphates as Grease Additives Under Reciprocating Sliding Test
Li Chen, Xiaosheng Zhang, Hong Xu, Jinxiang Dong, (Research Institute of Special Chemicals – College of Chemistry and Chemical Engineering – Taiyuan University, China)
https://link.springer.com/article/10.1007/s11249-016-0730-7Candle Soot as Particular Lubricant Additives
Jiaxing Wei, Meirong Cai, Feng Zhou, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,University of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-013-0290-zTribological Performance of Attapulgite Nano-fiber/Spherical Nano-Ni as Lubricant Additive
Feng Nan, Yi Xu, Fei Gao, Yixiong Wu, Zhuguo Li, (Shanghai Key Laboratory of Laser Processing and Materials Modification – Shanghai Jiaotong University, China,National Key Laboratory for Remanufacturing – Academy of Armed Forces Engineering, China,State Key Laboratory of Polymer Physics and Chemistry – Institute of Chemistry – Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-014-0430-0
https://www.mdpi.com/2075-4442/11/5/204Synergistic effects in binary systems of lubricant additives: a chemical hardness approach
Jean-Michel Martin, Carol Grossiord, Karine Varlot, Béatrice Vacher, Jinichi Igarashi, (Ecole Centrale de Lyon – Laboratoire de Tribologie at Dynamiques des Systèmes, France,Central Technical Research Laboratory – Nippon Oil Co., Ltd., Japan)
https://link.springer.com/article/10.1023/A:1019147520893Anti-wear Chemistry of ZDDP and Calcium Borate Nano-additive. Coupling Experiments, Chemical Hardness Predictions, and MD Calculations
Jean Michel Martin, Tasuku Onodera, Maria-Isabel De Barros Bouchet, Nozomu Hatakeyama, Akira Miyamoto, (Laboratory of Tribology and System Dynamics – Ecole Centrale de Lyon, France,Graduate School of Engineering and New Industry Creation Hatchery Center – Tohoku University, Japan)
https://link.springer.com/article/10.1023/A:1019191019134Effect of ZeO2 Nanoparticles Additive on the Tribological Behavior of Multialkylated Cyclopentanes
Jianqi Ma, Mingwu Bai, (School of Chemistry and Environmental Science – Shaanxi University of Technology, China,State Key Laboratory of Solid Lubricants – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-009-9459-xTribological Behavior of Amorphous and Crystalline Overbased Calcium Sulfonate as Additives in Lithium Complex Grease
Dabo Liu, Ming Zhang, Gaiqing Zhao, Xiaobo Wang, (State Key Laboratory of Solid Lubricants – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,Graduate University of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-011-9884-5Benzotriazole as the additive for ionic liquid lubricant: one pathway towards actual application of ionic liquids
X. Liu, F. Zhou, Y. Liang, W. Liu, (State Key Laboratory of Solid Lubricants – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-006-9050-7Study the Sensitivity of Solid Lubricating Additives to Attapulgite Clay Base Grease
Zeyun Wang, Yanqiu Xia, Zhilu Liu, (State Key Laboratory of Solid Lubricants – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,Graduate School of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-011-9754-1A High-Performance Multifunctional Lubricant Additive for Water-Glycerol Hydraulic Fluid
Junming Wang, Jianhua Wang, Chunsheng Li, Gaiqing Zhao, Xiaobo Wang, (State Key Laboratory of Solid Lubricants – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,Graduate School of Chinese Academy of Sciences, China,Navy Logistical Technical Equipment Research Institute, China)
https://link.springer.com/article/10.1007/s11249-011-9799-1Effect of phosphorous-containing additives on the wear of aluminium in the lubricated aluminium-on-steel contact
Yong Wan, Qunji Xue, (Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/BF00182546A dual-analysis approach in tribochemistry: application to ZDDP/calcium borate additive interactions
K. Varlot, J.M. Martin, C. Grossiord, R. Vargoilu, B. Vacher, K. Inoue, (Ecole Centrale de Lyon – Laboratoire de Tribologie at Dynamique des Systèmes, France,Central Technical Research Laboratory – Nippon Oil Co., Ltd., Japan)
https://link.springer.com/article/10.1023/A:1019167808656Interaction Between Selected MoS2 Nanoparticles and ZDDP Tribofilms
Tomala, B. Vengudusamy, M. Rodriguez Ripoll, A. Naveira Suarez, M. Remskar, R. Rosentsveig, (AC2T research GmbH, Austria,Lulea University of Technology, Sweden,Institut Jozef Stefan, Slovenia,Weizmann Institute of Science, Israel)
https://link.springer.com/article/10.1007/s11249-015-0552-zCorrosive-Abrasive Wear Induced by Soot in Boundary Lubrication Regime
F. Motamen Salehi, D.N. Khaembra, A. Morina, A. Neville, (Institute of Functional Surfaces (IFS) – University of Leeds, UK)
https://link.springer.com/article/10.1007/s11249-016-0704-9
https://www.proquest.com/docview/2281303662?sourcetype=Scholarly%20Journals
2. BONDED COATINGS
Potential of thermal sprayed TinO2n-1-coatings for substituting Molybdenum based ring coatings
J. Landaa, I. Illaramendia, N. Kellingb, M. Woydtb, A. Skoppb, M. Harteltb, (Tarabusi, Spain,BAM, Germany)
https://www.emerald.com/insight/content/doi/10.1108/00368790710776801/full/html
https://www.ingentaconnect.com/content/mcb/018/2007/00000059/00000005/art00003Reduced friction on γ-Mo2N coatings deposited by high power impulse magnetron sputtering on microstructured surfaces
Torsten Subea, Martin Kommerb, Martin Fenkerb, Berthold Hadera, Joachim Albrechta,
https://www.sciencedirect.com/science/article/abs/pii/S0301679X16303917Enhanced wear resistance of molybdenum nitride coatings deposited by high power impulse magnetron sputtering by using micropatterned surfaces
M. Kommera, T. Subeb, A. Richtera, M. Fenkera, W. Schulzb, B. Haderb, J. Albrechtb,
https://www.sciencedirect.com/science/article/abs/pii/S0257897217311155
3. MATERIALS TESTING
The Tribological Behavior of Various Plasma Sprayed Coatings Against Cast Iron
J. Yuansheng, W. Huadong, S. R. Nicoll, G. Barbezat, (Tsinghua University Beijing,Plasma-Technik AG)
https://www.sciencedirect.com/science/article/abs/pii/025789729290043AFretting Wear Performance of Glass, Carbon, and Aramid Fibre/Epoxy and Peek Composites
O. Jacobs, K. Friedrich, K. Schulte, G. Marom, H. D. Wagner, (Technical University Hamburg,DFVLR,Hebrew University of Jerusalem,The Weizman Inst.)
https://www.sciencedirect.com/science/article/abs/pii/0043164890900256Systematic Fretting Wear and Fretting Fatigue Studies on Carbon Fibre / Epoxy Laminates
O. Jacobs, K. Friedrich, K. Schulte, (Technical University Hamburg,DFVLR)
https://link.springer.com/chapter/10.1007/978-94-009-1123-9_83A Study of the Tribological Behaviour of Perfluoro-Polyethers
E. Cosmacini, V. Veronesi, (Stazione Sperimentali Olii e Grassi,IBM)
https://www.sciencedirect.com/science/article/abs/pii/0043164886900050Wear behaviour of titanium coating combinations at elevated temperatures
M. Thoma, (MTU München)
https://www.sciencedirect.com/science/article/abs/pii/004316489390120BFriction and wear of a plasma sprayed Al2O3-40%ZrO2-cast iron system
Huadong Wu, Yuansheng Jin, S. R. Nicoll, G. Barbezat, (Tsinghua University Beijing,Plasma-Technik AG)
https://www.sciencedirect.com/science/article/abs/pii/0043164894901961Abrasion, erosion and scuffing resistance of carbide and oxide ceramic thermal sprayed coatings for different applications
G. Barbezat, A. R. Nicoll, S. Sickinger, (Plasma-Technik AG,Electro-Plasma Inc.)
https://www.sciencedirect.com/science/article/abs/pii/004316489390538WFriction and Wear of HPSN Bearing Materials
M. F. Wani, B. Prakash, P. K. Das, S. S. Raza, J. Mukerji, (Central Glass & Ceramic Research Institute)
https://www.semanticscholar.org/paper/Friction-and-wear-of-HPSN-bearing-materials-Wani-Prakash/8d9e8898ffd4ea1779cb5dc057c30f387d71a5c8Effects of Surrounding Atmosphere on the Formation of Carbon Films at 450°C
S. Zhou, Y. Jin, S. Wen, (National Tribology Laboratory, Tsinghua University)
https://onlinelibrary.wiley.com/doi/10.1002/jsl.3000130104Reibverschleiß-Widerstand und Reib-Ermüdung von Hybrid-Verbundwerkstoffen
Prof. Dr. K. Friedrich, (TU Hamburg)
https://elib.dlr.de/42571/Einfluß unterschiedlicher Füllstoffe und Faserarten auf das Verschleißverhalten von Polyamid-46
R. Reinicke, I. Hoffmann, K. Friedrich, (Institut für Verbundwerkstoffe GmbH, Universität Kaiserslautern)
https://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=1935223Effect of Molybdenum Dithiocarbamate on Friction and Wear Properties between Aluminium Alloy and Steel
Katsuya Arai, Yuji Yamamoto, (Tonen Corp.,Kyushu University)
https://www.tandfonline.com/doi/abs/10.1080/10402000008982311The study on the tribological properties of fiber-reinforced PBT composites for various injection molding process parameters
Ming-Chang Jeng, Tse-Chang Li, Ching-Ping Fung, (Department of Mechanical Engineering, National Central University,Department of System Engineering, Chung Cheng Institute of Technology)
https://www.sciencedirect.com/science/article/abs/pii/S0043164802000455A study of tribological performances of tribo-induced graphitization of meso-carbon microbeads
Cui Xiaohao, Li Shenghua, Yin Yuansheng, Song Huaihe, (State Laboratory of Tribology, Tsinghua University Beijing,Institute of Carbon Fibers and Composites, Beijing University of Chemical Tribology)
https://link.springer.com/article/10.1023/A:1021717000880Tribological Characterization of Hard Coatings with and without DLC Top Layer in Fretting Tests
D. Klaffke, (BAM Bundesanstalt für Materialforschung und -prüfung, Berlin)
https://onlinelibrary.wiley.com/doi/abs/10.1002/tt.3Tribological Characterization of a-C:H Coatings at Room Temperature – Effect of Counterbody Material
D. Klaffke, J. Brand, C. Brand, R. Wittorf, (BAM Bundesanstalt für Materialforschung und -prüfung, Berlin,Fraunhofer-Institut IST, Braunschweig)
https://publica.fraunhofer.de/handle/publica/209154Effects of Frictional Conditions on Structural Transformation of Meso-Carbon Microbeads
Y. Jin, S. Si, X. Cui, H. Fu, H. Song, (Tsinghua University, Beijing,Peking University,Beijing University of Chemical Technology)
https://onlinelibrary.wiley.com/doi/10.1002/ls.26Tribological Investigations on Siliconcarbonitride Ceramics Derived from Preceramic Polymers
D. Klaffke, R. Wäsche, F. Aldinger, N. Janakiraman, (BAM Bundesanstalt für Materialforschung und -prüfung, Berlin,Max-Planck-Institut Stuttgart)
https://www.sciencedirect.com/science/article/abs/pii/0043164805004497In situ mechanochemical reconditioning of worn ferrous surfaces
Jin Yuansheng, Li Shenghua, Zhang Zhengye, Yang He, Wang Feng, (State Key Laboratory of Tribology, Tsinghua University Beijing)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X03002354Tribological properties of flame sprayed Fe-Ni-RE alloy coatings under reciprocating sliding
Zhenyu Zhang, Zhiping Wang, Bunv Liang, (The Mechanical Department, Lanzhou Polytechnical College,State Key Laboratory of New Nonferrous Metal Materials, Lanzhou University of Technology)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X06000387Chemical structure of phosphazenes in relation to the tribological properties of a steel-on-steel system
Jiamei Zhu, Ruizhi Chu, Xianliang Meng, (School of Chemical Engineering and Technology, China University of Mining and Technology)
https://www.sciencedirect.com/science/article/abs/pii/S0043164805004497Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy
Lin Wang, Jiqiang Ma, Jun Yang, Qinling Bi, Licai Fu, Weimin Liu, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences)
https://www.sciencedirect.com/science/article/abs/pii/S0043164809006504Effectiveness of lubricant additives for copper-alloy-steel sliding contacts
Robin Jisa, Andjelka Ristic, Josef Brenner, Thomas Lebersorger, Sotiraq Ilo, Friedrich Franek, Hans Neumayer, (AC²T research GmbH,Vienna University of Technology,Enzesfeld-Caro Metallwerke)
https://onlinelibrary.wiley.com/doi/10.1002/ls.118Designed fabrication of hard Cr-Cr2O3-Cr7C3 nanocomposite coatings for anti-wear application
Zhixiang Zeng, Yan Zhou, Bin Zhang, Yanlin Sun, Junyan Zhang, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences,Department of Physics, Lanzhou University)
https://www.sciencedirect.com/science/article/abs/pii/S1359645409004571Tribologische Charakterisierung von ta-C-Schichten bei Dieselschmierung
S. Makowski, V. Weihnacht, (Technische Universität Dresden)
https://publica.fraunhofer.de/entities/publication/78c520b5-ec57-4297-9090-486064786c25/detailsEntwicklung und tribologische Charakterisierung von TiC/a-C-Nanokompositen im Hinblick auf den Einsatz in mangelgeschmierten Gleitkontakten
Johannes Schneider, Michael Stüber, (Karlsruher Institut für Technologie KIT)
https://fzk.bibliothek.kit.edu/zb/veroeff/94019.pdfInvestigation on Tribological Behavior of Advanced High Strength Steels: Influence of Hot Stamping Process Parameters
Xiaowei Tian, Yisheng Zhang, Jian Li, (State Key Laboratory of Material Processing and Die and Mould Technology,College of Materials Science and Engineering,Huazong University of Science and Technology)
https://link.springer.com/article/10.1007/s11249-011-9908-1High-Temperature Self-Lubricated and Fracture Properties of Alumina/Molybdenum Fibrous Monolithic Ceramic
Yunfeng Su, Yongsheng Zhang, Junjie Song, Yuan Fang, Litian Hu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-015-0630-2Surface Engineering Design of Alumina/Molybdenum Fibrous Monolithic Ceramic to Achieve Continuous Lubrication from Room Temperature to 800 °C
Yunfeng Su, Litian Hu, Hengzhong Fan, Junjie Song, Yongsheng Zhang, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-017-0817-9Wear mechanisms on multiphase Al2O3 ceramics during running-in period in unlubricated oscillating sliding contact
D. Schaupp, J. Schneider, K.-H. Zum Gahr, (Universität Karlsruhe (TH) – Institute of Materials Science and Engineering II,Forschungszentrum Karlsruhe – Institute for Materials Research I)
https://link.springer.com/article/10.1023/A:1018852418897Sliding wear behavior of some Fe-, Co- and Ni-based metallic glasses during rubbing against bearing steel
Braham Prakash, Ken’ichi Hiratsuka, (Indian Institute of Technology Delhi,Chiba Institute of Technology)
https://link.springer.com/article/10.1023/A:1019191303146Wear behavior of diamond-silicon nitride composites sintered with FAST/SPS
Anne-Kathrin Wolfrum, Caroline Quitzke, Björn Matthey, Mathias Hermann, Alexander Michaelis, (Fraunhofer IKTS – Fraunhofer Institute for Ceramic Technologies and Systems,TU Dresden – Institute for Materials Science)
https://www.sciencedirect.com/science/article/abs/pii/S0043164816305683An Experimental Investigation of Semi-Interpenetrating Network Ceramic Skeleton-Reinforced Al-Alloy Composites Dry Sliding Against Cr12 Die Steel
Shao Yang Zhang, Ai Jiao Xue, Xue Feng Jin, Wei Ping Chen, Zhi Gang Li, Yan Ping Liu, Hai Bo Wang, (Department of Materials Science and Engineering – School of Physics and Electrical Engineering – Taizhou University)
https://link.springer.com/article/10.1007/s11249-011-9859-6Friction and Wear Behaviour of Brake Pads Dry Sliding Against Semi-Interpenetrating Network Ceramics/Al-Alloy Composites
Shao Yang Zhang, Yuan Yuan Li, Sheng Guan Qu, Wei Ping Chen, (National Engineering Research Center of Near-net-shape Forming for Metallic Materials,School of Mechanical and Automotive Engineering – South China University of Technology)
https://link.springer.com/article/10.1007/s11249-010-9582-8Dry-Sliding Tribological Properties of TiAl/Ti2AlC Composites
Jun Cheng, Fei Li, Licai Fu, Zhuhui Qiao, Jun Yang, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-013-0284-xDry sliding tribological behavior of nanocrystalline and conventional polycrystalline copper
Z. Han, L. Lu, K. Lu, (Shenyang National Laboratory for Materials Science,Institute of Metal Research – Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-005-9007-2Microstructure, mechanical and tribological properties of Mo2FeB2 based cermets with Mn addition
Fenghau Yang, Youzhi Wu, Jiesheng Han, Junhu Meng, (School of Materials Science and Engineering – Lanzhou University of Technology,State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences)
https://www.sciencedirect.com/science/article/abs/pii/S0925838816300536Tribology in metal forming at elevated temperatures
Kuniaki Dohda, Christine Boher, Farhad Rezai-Aria, Numpon Mahayotsanun, (Department of Mechanical Engineering – Northwestern University, IL, USA,Univerité de Toulouse – Mines Albi ICA, France,Department of Mechanical Engineering – Faculty of Engineering, Khon Kaen University, Thailand)
https://link.springer.com/article/10.1007/s40544-015-0077-3Fabrication and tribological properties of pulsed electric current sintered WC-Ni-Cr cermet containing IF-WS2 solid lubricant
Bin Wu, Xin-yang Huang, (Institute of Nuclear and New Energy Technology – Collaborative Innovation Center of Advanced Nuclear Energy Technology – Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University)
https://www.sciencedirect.com/science/article/abs/pii/S0263436817300598The damage mechanism of alloy 690TT caused byfretting wear in a flowing nitrogen environment
Long Xin, Yongming Han, Yonghao Lu, Weidong Zhang, Tetsuo Shoji, (National Center for Materials Service Safety, University of Science and Technology Beijing)
https://www.tandfonline.com/doi/full/10.1080/10402004.2020.1810836Influence of Interstitial Oxygen on the Tribology of Ti6Al4V
Daniel Kümmel, Johannes Schneider, Peter Gumbsch, (Institute for Applied Materials IAM, Karlsruhe Institute of Technology KIT,Fraunhofer Institute for Mechanics of Materials IWM,MicroTribology Center μTC)
https://link.springer.com/article/10.1007/s11249-020-01327-4Application oriented tribological test concepts
Dr. Mathias Woydt, Dr. Ameneh Schneider, (MATRILUB, Berlin,Optimol Instruments, Munich)
https://www.semanticscholar.org/paper/Application-oriented-tribological-test-concepts-Woydt/29054ae89fd34a0ecbb7c100a5e988c9a5a2d672Tribological and Mechanical Characterization of Nickel Aluminium Bronze (NAB) Manufactured by Laser Powder-Bed Fusion (L-PBF)
Fathia Alkelae, Shinya Sasaki, (Sasaki Laboratory, Department of Mechanical Engineering, Tokyo University of Science)
https://www.jstage.jst.go.jp/article/trol/15/3/15_126/_articleAdditive Manufacturing of Tungsten Carbide Surfaces with Extreme Wear Resistivity
Florian Köhn, Michael Sedlmajer, Joachim Albrecht, Markus Merkel,
https://www.mdpi.com/2079-6412/11/10/1240Wear properties of carbon-rich tungsten carbide films
L. Haus, M. Wildfeuer, J.-E. Grochowski, J. W¨ockel, M. Müller, F. K¨ohn, W. Schulz, C. Wüstefeld, D. Rafaja, J. Albrecht,
https://www.sciencedirect.com/science/article/abs/pii/S0043164821005299Investigations into the occurrence of galling during hot forming of Al–Si-coated high-strength steel
L Pelcastre, J Hardell, B Prakash,
https://journals.sagepub.com/doi/10.1177/1350650111398313
4. CORROSION AND WEAR PROTECTION
Zusammenhang von mechanischen Eigenschaften und Verschleißverhalten von kurzfaserverstärktem Polyamid-46
R. Reinicke, J. Hoffmann, K. Friedrich, (Institut für Verbundwerkstoffe GmbH, Universität Kaiserslautern)
https://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=802764Prüfung von Verschleißschutzmaßnahmen für Verdichterschaufeln aus Flugtriebwerken
J. Specht, W. Eichmann, (MTU Motoren- und Turbinen-Union München)
https://onlinelibrary.wiley.com/doi/abs/10.1002/1521-4052%28200008%2931%3A8%3C661%3A%3AAID-MAWE661%3E3.0.CO%3B2-GFretting wear mechanisms in contact of steel and silicon nitride ceramics
Mitjan Kalin, (University of Ljubljana)
https://plus.cobiss.net/cobiss/si/en/bib/2940699Wear behavior of Al-Sn alloys with different distribution of Sn dispersoids manipulated by mechanical alloying and sintering
X. Liu, M. Q. Zeng, Y. Ma, M. Zhu, (School of Materials Science and Engineering, South China University of Technology)
https://www.sciencedirect.com/science/article/abs/pii/S0043164808002470Niobcarbid – Ein vergessener Hartstoff für den Verschleißschutz in offenen und geschlossenen Tribosystemen
Mathias Woydt, Hardy Mohrbacher, (BAM)
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/33493
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/31531Comparison of unidirectional and reciprocating tribometers in tests with MoDTC-containing oils under boundary lubrication
R. Belarini, G.A.S. Diniz, F.J. Profito, R.M. Souza, (Surface Phenomena Laboratory – Escola Politécnica da Universidade de Sao Paulo)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X19301641
5. HIGH-TEMPERATURE MATERIAL
Influence of grain refinement on the high temperature fretting behaviour of IN 738 LC
D. Klaffke, T. Carsten, H. Banerji, (BAM, Berlin; Techn. University, Berlin)
https://www.sciencedirect.com/science/article/abs/pii/004316489390441NAn investigation of fretting Behaviour of ion-plated TiN, magnetron-sputtered MoS2 and their composite coatings
Guizhen Xu, Jiajun Liu, Xiaohua Ma, Zhongrong Zhou, (Tsinghua University, Beijing,Southwest Jiaotong University, Chengdu)
https://www.sciencedirect.com/science/article/abs/pii/S0043164899000058High temperature friction and wear characteristics of various coating materials for steam valve spindle application
B.S. Mann, Braham Prakash, (BHEL,ITMMEC)
https://www.sciencedirect.com/science/article/abs/pii/S0043164800003902Oscillating Sliding Wear Behaviour of SiC, TiC, TiB2, 59SiC-41TiB2 and 52SiC-24TiC-24TiB2 Materials up to 750°C in Air
R. Wäsche, R. Yarim, D. Klaffke, M. Hartelt, (BAM Bundesanstalt für Materialforschung und -prüfung, Berlin)
https://onlinelibrary.wiley.com/doi/10.1002/tt.8Schutzschichten gegen Schwingungsverschleiß im Triebwerksbau
Dr.-Ing. P. Adam, M. Paripovic, Dr. rer.nat. M. Thoma, (MTU München)
https://link.springer.com/chapter/10.1007/978-3-642-52224-6_5Effects of Solid Lubricant MoS2 on the Tribological Behavior of Hot-Pressed Ni/MoS2 Self-Lubricating Composites at Elevated Temperatures
Fu-Xing Wang, Yun-Xin Wu, Yin-Qian Cheng, Biao Wang, Steven Danyluk, (Tsinghua University, China,Georgia Institute of Technology – George W. Woodruff School of Mechanical Engineering, USA)
https://www.tandfonline.com/doi/abs/10.1080/10402009608983544Effect of temperature on friction and wear behavior under reciprocating dry sliding of AISI 52100 steel against AISI H13 steel
Alexander Zuleta Durango, Michelle Felipe Cano, Roberto Martins Souza, Amilton Sinatora, (Surface Phenomena Laboratory – Polytechnic School – University of Sao Paolo,Instituteo Tecnológico Vale, Ouro Preto)
https://www.astm.org/mpc20200017.htmlTriple Heat Treatment Effects on the Microstructure and Fretting Wear Behavior of Inconel X-750 Alloy
Ibrohim Rustanov, Yuming Wang, Zixi Wang, (State Key Laboratory of Tribology – Tsinghua University, China)
https://www.sciencedirect.com/science/article/abs/pii/S0043164823005112High temperature tribological behaviour of PVD coated tool steel and aluminium under dry and lubricated conditions
Justine Decrozant-Triquenaux, Leonardo Pelcastre, Cédric Courbon, Braham Prakash, Jens Hardell, (Division of Machine Elements, Luleå University of Technology, Sweden,Université de Lyon, CNRS, Ecole Nationale d'Ingénieurs de Saint-Etienne, France,Department of Mechanical Engineering, Tsinghua University, Beijing, China)
https://link.springer.com/article/10.1007/s40544-020-0435-7Influence of lubrication, tool steel composition, and topography on the high temperature tribological behaviour of aluminium
Justine Decrozant-Triquenaux, Leonardo Pelcastre, Braham Prakash, Jens Hardell, (Machine Elements, Luleå University of Technology, Sweden,Department of Mechanical Engineering, Tsinghua University, Beijing, China)
https://link.springer.com/article/10.1007/s40544-020-0371-6Chromium-nickel-alloys for wear application at elevated temperature
Julian Krell, Arne Röttger, (Ruhr-Universität Bochum, Department of Materials Engineering)
https://www.sciencedirect.com/science/article/abs/pii/S0043164819304235Comprehensive investigation of the microstructure-property relationship of differently manufactured Co–Cr–C alloys at room and elevated temperature
Julian Krell, Arne Röttger, Werner Theisen, (Chair of Materials Technology, Institute for Materials, Ruhr-Universität Bochum, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0043164819312840High temperature wear testing of a Ni-based superalloy pin on a cast iron disc - Hochtemperatur-Verschleißversuche am Tribosystem Alloy 80A – Gusseisen mittels Stift-auf-Scheibe Anordnung
C. Rynio, H. Hattendorf, J. Klöwer, H.-G. Lüdecke, G. Eggeler, (Ruhr-Universität Bochum, Institut für Werkstoffe, Bochum, Germany,Outokumpu VDM GmbH, Altena, Germany)
https://onlinelibrary.wiley.com/doi/abs/10.1002/mawe.201300165Influence of precipitation hardening on the high-temperature sliding wear resistance of an aluminium alloyed iron-nickel base alloy
Julian Krell, Arne Röttger, Ulf Ziesing, Werner Theisen, (Institute for Materials, Ruhr-Universität Bochum, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X20301833High Temperature Tribology under Linear Oscillation Motion
Raj Shah, Rui Chen, Mathias Woydt, Christoph Baumann, Joshua Jurs, Philip Iaccarino, (Various)
https://www.mdpi.com/2075-4442/9/1/5Entwicklung einer Prüfmethodik für thermisch hoch belastete, abgasbeaufsichtigte Gleitpaarungen
Tobias Rosenstingl, Dominik Kürten, Andreas Kailer, Willy Kunz, (Fraunhofer-Institut für Werkstoffmechanik, Freiburg & Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Dresden)
https://publica.fraunhofer.de/entities/publication/9bb45a6e-06a8-40e7-995b-0b1d1e23fa56/detailsInvestigation on tribological characteristics of boron steel 22MnB5–tool steel H13 tribopair at high temperature
Yanhong Mu, Baoyu Wang, (Various)
https://journals.sagepub.com/doi/10.1177/1350650116650818The Tribological Performance of Metal-/Resin-Impregnated Graphite under Harsh Condition
Jun Zhao, Yijiang Liu, Dengyu Liu, Yanfei Gu, Rao Zheng, Runmei Ma, Shuangxi Li, Yongfu Wang, Yijun Shi, (Various)
https://www.mdpi.com/2075-4442/10/1/2Mo Influencing the High-Temperature Wear Behavior of HVOF-Sprayed High-Entropy Alloy Coatings
Lisa-Marie Rymer, Thomas Lindner, Thomas Lampke, (Various)
https://www.mdpi.com/2079-6412/13/1/9Tribological behavior of Ni-based self-lubricated cladding containing sulfide of nickel, copper or bismuth at temperature up to 600 °C
R. Kumar, (Various)
https://www.sciencedirect.com/science/article/abs/pii/S0257897223000452A Ni-Bi self-lubricating Ti6Al4V alloy for high temperature sliding contacts
Hector Torres, Kurt Pichelbauer, Serhiy Budnyk, Thomas Schachinger, Carsten Gachot, Manel Rodríguez Ripoll, (Various)
https://www.sciencedirect.com/science/article/abs/pii/S0925838823005194
6. CYLINDER LINER, LUBRICANT AND MATERIALS TESTING
Mikrohydrodynamik und Festkörperkontakt – Betrachtungen am Beispiel des Tribosystems Kolben-Kolbenringe-Zylinderlaufbahn
Dipl.-Ing. A. Heuberger, Dr.-Ing. V. Lagemann, Dipl.-Ing. F. Chu Suy, H. Gasthuber, Dr. Rer.nat. H.-J. Füßer, A. Kratzsch, (VDI-Berichte Nr. 1764, Stuttgart,Ulm)
https://searchworks.stanford.edu/articles/edscal__edscal.15283080Diesel Engine Failures due to Fuel with Insufficient Lubricity
A.J. von Wielligh, N.D.L. Burger, T.L. Wilcocks, (Various)
https://www.emerald.com/insight/content/doi/10.1108/00368790310470895/full/htmlTribological performance of new triboactive Tin-2Cr2O2n-1 as piston ring and cylinder liner coatings interacting with bio-no-tox lubricants
Mathias Woydt, Bernard Criqui, Gerard Desplanches, Tom Linnemann, (Federal Institute for Materials Research and Testing (BAM), Germany,Renault SA, Rueil-Malmaison, France,Renault SA, Guyancourt, France)
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/31742A rig test to measure friction and wear of heavy duty diesel engine piston rings and cylinder liners using realistic lubricants
John J. Truhan, Jun Qu, Peter J. Blau, (University of Tennessee, Knoxville, USA,Oak Ridge National Laboratory, USA)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X04001586Testing Friction and Wear of the Tribosystems Piston Ring and Cylinder Liner Outside of Engines
Dr. Mathias Woydt, Johannes Ebrecht, (BAM,Optimol Instruments Prüftechnik GmbH)
https://www.academia.edu/62390529/Testing_friction_and_wear_of_the_tribosystem_piston_ring_and_cylinder_liner_outside_of_enginesInvestigation of Influence of Inclination on Friction and Wear Mechanisms in Piston Ring Cylinder Liner Contact with the New SRV® 4 Test Rig
A. Pauschitz, M. Jech, T. Lebersorger, Ebrecht, (AC²T research GmbH, Austria,Optimol Instruments Prüftechnik GmbH, Germany)
https://asmedigitalcollection.asme.org/WTC/proceedings-abstract/WTC2005/42029/561/315056Engine Oils in the Field: A Comprehensive Tribological Assessment of Engine Oil Degradation in a Passenger Car
Adam Agocs, Charlotte Besser, Josef Brenner, Serhiy Budnyk, Marcella Frauscher, Nicole Dörr, (Various)
https://link.springer.com/article/10.1007/s11249-022-01566-7Tribological Tests to Simulate Wear on Piston Rings in Critical Component Wear in Heavy Duty Engines
A. Igartua, X. Fernandez-Pérez, M. Woydt, R. Luther, I. Illarramendi, (Various)
https://onlinelibrary.wiley.com/doi/10.1002/9780470828847.ch11Study on Tribology Performance of Diesel Engine Oil Using SRV4 Tribometer
Xiaohong Xu, Shuren Sun, Peng Wang, Ailian Lei, Guanhua Peng, (PetroChina Lanzhou Lubricating Oil R&D Institute, DongFeng Commercial Vehicle Technical Center)
https://www.jstage.jst.go.jp/article/trol/10/2/10_172/_articlePiston Ring Wear in Tribometrical Testing under the Influence of Ethanol Combustion Products
Claudia Lenauer, Christian Tomastik, Thomas Wopelka, Barbara Dymerska, Martin Jech, Franz Novotny-Farkas, (AC2T research GmbH,OMV Refining and Marketing)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X14002291Wear of Different Material Pairings for the Piston Ring-Cylinder Liner Contact
Thomas Wopelka, C. Lenauer, L. Spiller, A. Pauschitz, M. Jech, (AC2T research GmbH)
https://www.emerald.com/insight/content/doi/10.1108/ILT-07-2017-0218/full/htmlGesamtheitlicher Ansatz zur Bewertung von Oberflächenstrukturen der Paarung Kolbenring/Zylinderlaufbahn
Dipl.-Ing. Falk Herbert Hannemann, (Universität Kassel Fachbereich Maschinenbau // BMW)
https://www.deutsche-digitale-bibliothek.de/item/FJSAZNK7ZD3QTTGSI4I5Q6EFVPUDJLEGBewertung von Honstrukturen im Ring-Liner-Kontakt an einem optimierten Oszillationstribometer
Patrick Beau, Stefan Schmidt, Christian Busch, Ludger Deters, (Westsächsische Hochschule Zwickau)
https://www.tib.eu/en/search/id/tema:TEMA20141101164/Bewertung-von-Honstrukturen-im-Ring-Liner-KontaktFriction behavior and the Stribeck curve in reciprocating cycles
Eduardo Dominguez Trindade, Amilton Sinatora, (Petrobras S.A,USP)
https://abmproceedings.com.br/ptbr/article/friction-behaviour-and-the-stribeck-curve-in-reciprocating-cyclesThe influence of oil supply and cylinder liner temperature on friction, wear and scuffing behavior of piston ring cylinder liner contacts – A new model test
Petra Obert, Torben Müller, Hans-Jürgen Füßer, Dirk Bartel, (R&D Daimler AG, Ulm, Germany,Institute of Machine Design, Otto-von-Guericke University, Magdeburg, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X15003680The Influence of a Piston Ring Coating on the Wear and Friction Generated during Linear Oscillation
Arthur Rozario, Christoph Baumann, Raj Shah, (Electrical and Computer Engineering Department, Stony Brook University, USA,Optimol Instruments Prüftechnik GmbH, Munich, Germany,Koehler Instrument Company, Holtsville, USA)
https://www.mdpi.com/2075-4442/7/1/8Functional Development of Friction and Wear Tester Machine with Simulation of Tribological Behaviours of Piston Ring-Cylinders
WANG Yun-xia, YAN Feng-yuan, Yan Jie, Kou Guan-tao, WANG Bo, (Public Technical Service Center – Lanzhou Institute of Chemical Physics, State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics, China)
https://www.fxcsjsyyq.net/fxcsjsyyq/en/article/doi/10.16495/j.1006-3757.2019.02.007?viewType=HTMLThe Influence of Diesel Soot on Tribological Behavior of Cyinder Liner/Piston Ring
SU Peng, XIONG Yun, LIU Xiao, YANG He, FAN Linjun, (Department of Oil Application & Management Engineering – Logistic Engineering University Chongqing, Sinopec Research Institute of Petroleum Processing, Beijing, China)
https://www.tribology.com.cn/en/article/Y2017/I2/206Tribological Research of some Piston Materials Lubricated by Alcohol with Low Acidity
Liu Xiao, Li Shenghua, Zhao Wancheng, Jin Yuasheng, (Oil Applied Department – Logistical Engineer College Chongqing, State Key Laboratory of Tribology – Tsinghua University, Beijing, China)
https://materialstechnology.asmedigitalcollection.asme.org/WTC/proceedings-abstract/WTC2005/42010/471/307374Competitive Surface Interactions of Critical Additives with Piston Ring/Cylinder Liner Components under Lubricated Breaking-In conditions
Shenghua Li, Ruijun Zhang, Yuansheng Jin, Yucongwang, Simon C. Tung, (Tsinghua University – State Key Laboratory of Tribology, China, General Motors Powertrain, General Motors Research and Development Center – Chemical and Environmental Sciences Laboratory, USA)
https://www.tandfonline.com/doi/abs/10.1080/10402000308982617Bench Performance Test Methods for Lubricated Engine Materials
Peter Blau, Simon C.Y. Tung, (Various)
https://www.astm.org/mnl6220121209213.html
https://asmedigitalcollection.asme.org/astm-ebooks/book/640/chapter-abstract/27757861/Bench-Performance-Test-Methods-for-Lubricated?redirectedFrom=fulltextStudy on Tribology Performance of Diesel Engine Oil Using SRV4 Tribometer
Xiaohong Xu, Shuren Sun, Peng Wang, Ailian Lei, Guanghua Peng, (PetroChina Lanzhou Lubricating Oil R&D Institute Lanzhou, China & DongFeng Commercial Vehicle Technical Center Wuhan, China)
https://www.jstage.jst.go.jp/article/trol/10/2/10_172/_articleHydrodynamic Fluid Film and Tribofilm Formation—Combining the Friction Signals with Contact Resistance
Mathias Woydt, Raj Shah, (MATRILUB -Materials-Tribology-Lubrication, Berlin, Germany,Koehler Instrument Company, Inc., Bohemia, NY, USA)
https://www.astm.org/mpc20190261.htmlTribologische Aspekte zukünftiger Verbrennungsmotoren für Power-to-X
P. Berlet, D. Hoffman, K. Pöhlmann, A. Kailer, I. Khader, D. Kürten, R. Luther, J. Rausch, C. Rynio, J. Neuhaus, T. Cornelsen, D. Emde, (IAVF Antriebstechnik GmbH, Karlsruhe,Frauenhofer-Institut für Werkstoffmechanik IWM, Freiburg,Fuchs Schmierstoffe GmbH, Mannheim,Bleistahl Produktions-GmbH & Co. KG, Wetter)
https://publica.fraunhofer.de/entities/publication/89702f02-e70d-4fda-8c32-6b02c52ed899/detailsStribeck-type Curves of Alternative Engine Oils Part I: Gray cast iron liner
Mathias Woydt, Norbert Kelling, Falk Hannemann, Niklas Berberich, Holger Ziegele, (BAM Federal Institute for Materials Research and Testing,BMW Group, Munich)
https://www.asmedigitalcollection.asme.org/materialsperformance/article-abstract/3/1/204/1186454/Stribeck-Type-Curves-of-Alternative-Engine-Oils?redirectedFrom=fulltextStribeck-type Curves of Alternative Engine Oils Part II: AlSi17Cu4 liners
Mathias Woydt, Norbert Kelling, Falk Hannemann, Niklas Berberich, Holger Ziegele, (BAM Federal Institute for Materials Research and Testing,BMW Group, Munich)
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/26642Effects of Operating Conditions and Pit/Area Ratio on the Coefficient of Friction of Textured Assemblies in Lubricated Reciprocating Sliding
Slawomir Wos, Waldemar Koszela, Andrzej Dzierwa, Pawel Pawlus, (Department of Manufacturing Processes and Production Engineering, Rzeszów University of Technology, 35-959 Rzeszów)
https://www.mdpi.com/journal/materials
7. KORRELATION DER SRV® TESTERGEBNISSE ZU ANDEREN PRÜFGERÄTEN - CORRELATION OF SRV® TEST RESULTS WITH THOSE OF OTHER TEST MACHINES
Tribology in Cold Pilgering
Jens Hardell, (Luleå University of Tribology)
https://www.diva-portal.org/smash/get/diva2:1030233/FULLTEXT01.pdfVergleichende tribologische Untersuchungen von Umform-Schmierstoffen
Schulz, F. Klocke, T. Maßmann, T. Roßrucker, (Wisura Mineralölwerk Goldgrabe & Scheft GmbH & Co.,WZL RWTH Aachen,Rhein Chemie Rheinau GmbH)
https://www.prode.rwth-aachen.de/cms/PRODE/Forschung/Publikationen/~hlgy/Details/?file=115141Vorstellung eines Prüfkonzepts als Screeningmethode für Getriebeöle auf dem translatorischen Oszillationstribometer (SRV®)
Gregor Patzer, Johannes Ebrecht, (Optimol Instruments)
https://elibrary.utb.de/doi/10.5555/tus201620058
8. STAHLINDUSTRIE - STEEL INDUSTRY
9. FRETTING / SCHWINGUNGS-VERSCHLEIß - FRETTING / OSCILLATION WEAR
Use of equations for wear volume determination in fretting experiments
M. Kalin, J. Vizintin, (University of Ljubljana)
https://www.sciencedirect.com/science/article/abs/pii/S0043164899003221Mechanisms of material removal during high temperature fretting of TiCN-Ni based cermets
B.V. Manoj Kumar, Bikramjit Basu, (Indian Institute of Technology)
https://www.sciencedirect.com/science/article/abs/pii/S0263436808000024Effect of Cold Rolling on the Fretting Wear Behavior and Mechanism in Inconel 600 Alloy
Zihao Wang, Yonghao Lu, Haoyang Zhang, Tetsuo Shoji, (National Center for Materials Service Safety,University of Science and Technology,Fracture and Reliability Research Institute,Tohoku University)
https://www.tandfonline.com/doi/full/10.1080/10402004.2015.1121312Fretting Wear Behavior of UHMWPE – Influence of Load and Stroke
Qiufeng Wang, Yunxia Wang, Hongling Wang, Na Fan, Fengyuan Yan, (State Key Laboratory of Solid Lubrication,Lanzhou Institute of Chemical Physics,Chinese Academy of Science,University of Chinese Academy of Sciences)
https://www.tandfonline.com/doi/full/10.1080/10402004.2016.1155787Fretting Wear Behavior and Mechanism of Inconel 690 Alloy Related to the Displacement Amplitude
L. Xin, Z.H. Wang, J. Li, Y.H. Lu, T. Shoji, (National Center for Materials Service Safety,University of Science and Technology,Fracture and Reliability Research Institute,Tohoku University)
https://www.tandfonline.com/doi/full/10.1080/10402004.2016.1230686Tribological Behavior and Microstructure of Carbon Fiber-reinforced Polymer against Ti6Al4V alloy in Fretting Contact
Jian Li, Kaifu Zhang, Ping Liu, Yuan Li, (College of Mechanical and Electronic Engineering – Fujian Agriculture and Forestry University,Key Lab of Contemporary Design and Integrated Manufacturing Technology of Ministry of Education,Lab of Aeronautical & Astronautical assembly – School of Engineering – Northwestern Polytechnical University)
https://www.tandfonline.com/doi/full/10.1080/10402004.2017.1313471Influence of content of carbon fabric on the low amplitude oscillating wear performance of polyetherimide composites
I. Bijwe, R. Rattan, (Industrial Tribology Machine Dynamics and Maintenance Centre (ITMMEC) – Indian Institute of Technology Delhi)
https://link.springer.com/article/10.1007/s11249-006-9060-5Optimum concentration of reinforcement and solid lubricant in polyamide 12 composites for best tribo-performance in two wear modes
J. Bijwe, V. Naidu, N. Bhatnagar, M. Fahim, (Industrial Tribology, Machine Dynamics and Maintenance Engineering Centre,Centre for Polymer Science and Engineering – Indian Institute of Technology,Mechanical Engineering Department – Indian Institute of Technology)
https://link.springer.com/article/10.1007/s11249-005-9010-7Fretting wear properties of Inconel600 alloy at high temperature
XIN Long, MA Miao, Lu Yong-hao, (National Center for Materials Service Safety – University of Science and Technology Beijing)
https://cje.ustb.edu.cn/en/article/doi/10.13374/j.issn2095-9389.2015.07.015Fretting Wear Behavior of UHMWPE – Influence of Load and Stroke
Qiufeng Wang, Yunxia Wang, Hongling Wang, Na Fan, Fengyuan Yan, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://www.tandfonline.com/doi/full/10.1080/10402004.2016.1155787Fretting Wear Behavior and Mechanism of Inconel 690 Alloy Related to the Displacement Amplitude
L. Xin, Z. H. Wang, J. Li, Y. H. Lu, T. Shoji, (National Center for Materials Service Safety – University of Science and Technology Beijing,Fracture and Reliability Research Institute – Tohoku University)
https://www.tandfonline.com/doi/full/10.1080/10402004.2016.1230686Worries over Fretting wear
CAITLIN JACOBS, (Lubes’n’Greases magazine)
https://www.lubesngreases.com/magazine/26_10/worries-over-fretting-wear/Self-lubrication of tribologically-induced oxidation during dryreciprocating sliding of aged Ti–Ni51.5 at% alloy
Rui YANG, Wei MA, Chunjian DUAN, Song LI, Tingmei WANG, Qihua WANG, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences,Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s40544-020-0395-yA study of grease lubricants under wind turbine pitch bearing conditions
Fabian Schwack, Norbert Bader, Johan Leckner, Claire Demaille, Gerhard Poll, (Leibniz University Hannover, Institute of Machine Design and Tribology,KTH Royal Institute of Technology, Department of Machine Design,Axel Christiernsson International AB)
https://www.sciencedirect.com/science/article/pii/S0043164819318514Analyse von Einflussparametern auf den Stick-Slip Effekt mittels Tribometerversuchen und EF-Simulation
Martin Wittmaack, Markus André, Jürgen Molter, (Hochschule Hannover & Hochschule Mannheim)
https://elibrary.narr.digital/xibrary/start.xav?start=%2F%2F%2A%5B%40node_id%3D%2755654%27%5D
10. EP-EIGENSCHAFTEN - EP PROPERTIES
Automatic detection of scuffing using acoustic emission
F. Saeidi, S.A. Shevchik, K. Wasmer, (Laboratory for Advanced Materials Processing, Empa-Swiss Federal Laboratories for Materials, Science and Technology)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X15003631An Investigation into Lubrication and Oxide Breakdown During Load-Carrying Capacity Testing
Vivian P. Möller, Philip L. De Vaal, (Department of Chemical Engineering – University of Pretoria)
https://www.tandfonline.com/doi/full/10.1080/10402004.2014.921964New approach to interpreting seizure tests on the translatory oscillation tribometer (SRV®)
Gregor Patzer, Johannes Ebrecht, (Optimol Instruments Prüftechnik GmbH)
https://www.stle.org/images/pdf/STLE_ORG/AM2017%20Presentations/Tribotesting/STLE%202017_Tribotesting%20III_Session%203J_G.%20Patzer_New%20Approach%20to%20Interpreting%20Seizure%20Tests%20on%20the%20Translatory%20Oscillation%20Tribometer.pdf
11. METHODEN ZUR VERSCHLEIß-MESSUNG - METHODS FOR MEASURING WEAR
Applications of radioactive tracer technology in real-time measurement of wear and corrosion
D.C. Eberle, C.M. Wall, M.B. Treuhaft, (Department of Engine, Emissions and Vehicle Research, Southwest Research Institute)
https://www.sciencedirect.com/science/article/abs/pii/S0043164805001997TLA and wear quantification of an aluminium-silicon-copper alloy for the car industry
E. Corniani, M. Jech, F. Ditroi, T. Wopelka, F. Franek, (Austrian Center of Competence for Tribology – AC2T research GmbH,Atomki, Nuclear Research Institute of the Hungarian Academy of Sciences)
https://www.sciencedirect.com/science/article/abs/pii/S0043164809001379NYE Lubricants teams with Taylor Hobson in utilizing optical profilometry to develop higher performing lubricants
Jamie Ross, (Tribology & Lubrication Technology, STLE Magazine)
https://digitaleditions.walsworth.com/publication/?i=180780&article_id=1543227&view=articleBrowser
12. ENGINE OIL
Impacts of Fully-Formulated Engine-Oils Containing MoDTC on the Tribological Performance of Nitrided Piston Rings Sliding Against Cast Iron Cylinder Bores
MA Ya-jun, LI Sheng-hua, JIN Yuan-sheng, WANG Yucong, TUNG Simon C., (State Key Laboratory of Tribology, Tsinghua University, Beijing,GM Powertrain, General Motors Corporation,GM R & D Center, General Motors Corporation)
https://www.tandfonline.com/doi/full/10.1080/05698190490455681Tribocarbonisation of a Synthetic Engine Oil in Lubricated Piston Ring/Cylinder Bore Sliding Contact and its Relation to Friction and Wear
S.H. Li, R.J. Zhang, Y.S. Jin, Y.C. Wang, TUNG Simon C., (State Key Laboratory of Tribology, Tsinghua University, Beijing,GM Powertrain,GM R & D Center, General Motors Corporation)
https://onlinelibrary.wiley.com/doi/abs/10.1002/jsl.3000200303
https://www.academia.edu/109609282/Tribocarbonisation_of_a_synthetic_engine_oil_in_lubricated_piston_ring_cylinder_bore_sliding_contact_and_its_relation_to_friction_and_wearLubricating Durability of Two GF Category Engine Oils
Yajun Ma, Wancheng Zhao, Shenghu Li, Yucong Wang, Simon Tung, (State Key Laboratory of Tribology, Tsinghua University Beijing,General Motors, Warren)
https://www.emerald.com/insight/content/doi/10.1108/00368790510601725/full/html
https://www.deepdyve.com/lp/emerald-publishing/lubricating-durability-of-two-gf-category-engine-oils-utE2p5kq0qDevelopment of 5W-30 GF-4 Fuel-saving Engine Oil for DLC-coated Valve Lifters
Sachido Okuda, Takahiro Dewa, Takumaru Sagawa, (Nissan Motor Co., Ltd.)
https://www.sae.org/publications/technical-papers/content/2007-01-1979/Evaluation of Low Phosphorus Engine Oil Containing MoDTC
Satoru Yoshida, Yasushi Naitoh, (Japan Energy Corporation)
https://www.sae.org/publications/technical-papers/content/2007-01-1962/Friction and Wear Properties of Hard Coatings on Steel Surfaces under Lubrication with a Fully Formulated Oil with a Mo Additive
Kiichi Nakagome, Kaisei Sato, Hikaru Okubo, Seiya Watanabe, Shinya Sasaki, (Department of Mechanical Engineering, Graduate School of Tokyo University of Science, Japan,Institute for the Creation of Functional and Structural Materials, Fukuoka University, Japan,Department of Mechanical Engineering, Tokyo University of Science, Japan)
https://www.jstage.jst.go.jp/article/trol/16/1/16_59/_article
https://doaj.org/article/ecae48f86e9a4827a3500cff9f433c13Alternative Eco-friendly Lubes for Clean Two-stroke Engines
R. Nevshupa, X. Fernandez, M. Conte, A. Igartua, R. Zabala, J. Bernaola, P. Zabala, R. Luther, J. Rausch, (Fundación Tekniker, Spain,Abamotor Energía, SL, Spain,Fuchs Europe GmbH, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X10000332CO2-Neutral Fuels and Lubricants Based on Second Generation Oils such as Jatropha
Dirk Spaltmann, Alexander von Gablenz, Mathias Woydt, (BAM,ELAION AG)
https://asmedigitalcollection.asme.org/journalastminternational/article-abstract/7/4/1/1179168/CO2-Neutral-Fuels-and-Lubricants-Based-on-Second?redirectedFrom=fulltext
https://www.astm.org/jai102549.htmlFriction and Wear Performance of MoDTC- and Ester-Containing Lubricants over Steel Surfaces under Reciprocating Conditions
Eduardo Dominguez Trindade, Alexander Zuleta Durango, Amilton Sinatora, (Research and Development Centre Petrobras S.A.,Department of Mechanical Engineering, Universidad de Sao Paolo)
https://onlinelibrary.wiley.com/doi/abs/10.1002/ls.1270Lubricant Technology to Enhance the Durability of Low Friction Performance of Gasoline Engine Oils
Katsuya Arai, Michiya Yamada, Satoshi Asano, Shigeyuki Yoshizawa, Hirobumi Ohira, Kohkichi Hoshino, Fumio Ueda, Kenyu Akiyama, (Tonen Corp.,Esso Sekiyu K.K.,Toyota Motor Corp.)
https://www.jstor.org/stable/44615212
https://www.sae.org/publications/technical-papers/content/952533/Retention of Friction Reducing Performance of MoDTC-Containing Fuel Efficient Gasoline Engine Oils during Use
Yasuhisa Yamada, Mitsuaki Ishimaru, Akira Yaguchi, Kiyoshi Inoue, Kenyu Akiyama, Hiromi Kawai, (Nippon Mitsubishi Oil Corporation,Toyota Motor Corporation)
https://www.sae.org/publications/technical-papers/content/2000-01-2053/Friction Reduction Benefits in Valve-Train System Using IF-MoS2 Added Engine Oil
M. Sgroi, F. Gili, D. Mangherini, I. Lahouij, F. Dassenoy, I. Garcia, I. Odriozola, G. Kraft, (Centro Ricerche Fiat – Group Materials Lab, Italy,Ecole Centrale de Lyon, France,Materials Division, IK4-CIDETEC Research Centre, Spain,Fuchs Europe Schmierstoffe, Germany)
https://www.tandfonline.com/doi/full/10.1080/10402004.2014.960540Impacts on Friction-Modified Fully Formulated Engine Oils on Tribological Performance of Nitrided Piston Rings Sliding against Cast Iron Cylinder Bores
Yajun Ma, Shenghua Li, Yuansheng Jin, Yucong Wang, Simon C. Tung, (State Key Laboratory of Tribology – Tsinghua University,GM Powertrain – General Motors Corporation, USA,GM R&D Center – General Motors Corporation, USA)
https://www.tandfonline.com/doi/full/10.1080/05698190490455681Effect of Soot Properties in Diesel Engine Oils on Frictional Characteristics
Congmin Liu, Shuzo Nemoto, Satoshi Ogano, (TonenGeneral Sekiyu K.K.)
https://www.tandfonline.com/doi/abs/10.1080/10402000308982593Tribological Compatibility of Selected Pb-Free Engine Bearing Materials with Different Engine Oil Formulations
Daniel W. Gebretsadik, Jens Hardell, Christoph Gabler, Braham Prakash, (Department of Engineering Sciences and Mathematics – Division of Machine Elements – Luleå University of Technology, Sweden,Austrian Excellence Center for Tribology (AC2T), Austria)
https://www.semanticscholar.org/paper/Tribological-Compatibility-of-Some-Selected-Pb-Free-Gebretsadik-Hardell/54cf70df806a210dd5fa3fc8c9fc8e79df499e57Effect of Load and Temperature on Tribological Properties of Soot Contaminated Diesel Engine Oil
SU Peng, XiONG Yun, LIU Xiao, Yang He, FAN Linjun, (Department of Oil Application & Management Engineering – Logisitc Engineering University, Chonqing,Sinopec Research Institute of Petroleum Processing, Beijing, China)
https://www.tribology.com.cn/en/article/doi/10.16078/j.tribology.2017.04.009?viewType=citedby-infoThe Study of Friction Modifiers to Improve Fuel Economy for WLTP with Low and Ultra-Low Viscosity Engine Oil
Kenji Yamamoto, Tsuyoshi Hiramatsu, Ryo Hanamura, Yukiya Moriizumi, (ADEKA Corporation, Japan,ADEKA Europe GmbH, Germany)
https://www.sae.org/publications/technical-papers/content/2019-01-2205/Development of Low Viscosity 0W-16 Fuel-Saving Engine Oil using a Synergistic Optimization of an Innovative Base Oil and Performant Additives while Maintaining Engine Durability in a ILSAC GF6-B Environment
Nicolas Champagne, Paula Ussa-Aldana, Mathieu Consigny, Camille Herry, (TOTAL Marketing & Services,Infineum)
https://www.sae.org/publications/technical-papers/content/2019-01-2240/
13. SRV® MESSTECHNIK UND METHODIK - SRV® MEASUREMENT TECHNOLOGY AND METHODOLOGY
Applications and Advantages of Dynamic Tribology Testing
Johannes Ebrecht, James R. Dickey, (Optimol Instruments Prüftechnik GmbH)
https://www.nlgi.org/downloads/applications-and-advantages-of-dynamic-tribology-testing/Influence of Test Parameters on Tribological Results – Synthesis from Round Robin Tests
M. Woydt, Johannes Ebrecht, (BAM,Optimol Instruments Prüftechnik GmbH)
https://asmedigitalcollection.asme.org/astm-ebooks/book/2056/chapter-abstract/27878180/Influence-of-Test-Parameters-on-Tribological?redirectedFrom=PDFInfluence of Test Conditions on Tribological Behaviour
M. Woydt, J. Ebrecht, (Federal Institute for Materials Research and Testing (BAM),Optimol Instruments Prüftechnik GmbH)
https://heattransfer.asmedigitalcollection.asme.org/WTC/proceedings-abstract/WTC2005/42010/859/307564Untersuchung des Reibungs-und Verschleißverhaltens unterschiedlicher metallischer Materialpaarungen unter dem Einfluss der Neigung bei der SRV®4-Prüfmaschine
Dipl.-Ing. Martin Jech, Dipl.-Ing.(FH) Thomas Lebersorger, Dipl.-Ing. Dr. Andreas Pauschitz, (AC2T Research GmbH)
https://dgmk.de/publikationen/untersuchung-des-reibungs-und-verschleissverhaltens-verschiedener-hydraulikfluessigkeiten-in-der-testapparatur-zur-mechanischen-pruefung-von-hydraulikfluessigkeiten-ersatz-fuer-den-fluegelz/Einfluss der Neigung der tribologischen Kontaktfläche auf die Schmierstoffverfügbarkeit bei SRV-Tests
M. Jech, Th. Lebersorger, F. Franek, (AC2T Research GmbH)
https://repositum.tuwien.at/handle/20.500.12708/69532Influence of Test Parameters on Tribological Measurements – Results from International Round Robin Tests
Mathias Woydt, Johannes Ebrecht, (Federal Institute for Materials Research and Testing (BAM),Optimol Instruments GmbH)
https://onlinelibrary.wiley.com/doi/abs/10.1002/tt.3020100106Application oriented tribological test concepts
Dr. Mathias Woydt, Dr. Ameneh Schneider, (MATRILUB, Berlin,Optimol Instruments)
https://www.semanticscholar.org/paper/Application-oriented-tribological-test-concepts-Woydt/29054ae89fd34a0ecbb7c100a5e988c9a5a2d672New Methodologies Indicating Adhesive Wear in Load Step Tests on the Translatory Oscillation Tribometer
Gregor Patzer, Mathias Woydt, (Optimol Instruments,Materials Tribology Lubrication)
https://www.mdpi.com/2075-4442/9/10/101Ultrasonic Film Thickness and Viscosity Measurements in Lubricated Contacts
Fabio Tatzgern, Michele Schirru, Markus Varga, Martin Gröschl, (AC2T research GmbH,Institut für Angewandte Physik, Technische Universität Wien)
https://repositum.tuwien.at/handle/20.500.12708/78431
14. HAFT-GLEIT-EFFEKTE - STICK-SLIP EFFECTS
Study on Stick-Slip Friction of Reciprocating O-Ring Seals Using Acoustic Emission Techniques
Chuanjun Liao, Shuangfu Suo, Yuming Wang, Weifeng Huang, Ying Liu, (State Key Laboratory of Tribology – Tsinghua University)
https://www.tandfonline.com/doi/full/10.1080/10402004.2011.626145Modelling and Simulation Assisted Tribometrology
Friedrich Franek, Georg Vorlaufer, Astrid Stadler, Martin Jech, Thomas Wopelka, (AC²T RESEARCH GMBH,Vienna University of Technology,ÖTG – THE AUSTRIAN TRIBOLOGY SOCIETY)
https://www.tribology.rs/journals/2008/2008-3-4/6.pdfStatistical evaluation of experimental and numerical data of stick–slip effects in harmonically excited systems
Manuel Scholl, Baldur Tiesler, Gerhard Müller, (Department of Civil, Geo and Environmental Engineering, Technical University of Munich,BMW AG)
https://www.sciencedirect.com/science/article/abs/pii/S0022460X21005617
15. IONISCHE FLÜSSIGKEITEN - IONIC LIQUIDS
Investigation of Tribological Behaviour of Al-Si Alloy Against Steel Lubricated With Ionic Liquids of 1-Diethylphosphonyl-n-propyl-3-Alkylimidazolium Tetrafluoroborate
Zonggang Mu, Xiaoxuan Wang, Shuxiang Zhang, Yongmin Liang, Meng Bao, Weimin Liu, (University of Jinnan,State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences)
https://asmedigitalcollection.asme.org/tribology/article-abstract/130/3/034501/468596/Investigation-of-Tribological-Behavior-of-Al-Si?redirectedFrom=fulltextStudy of the Conductivity and Tribological Performance of Ionic Liquid and Lithium Grease
Xiaoqiang Fan, Yanqiu Xia, Liping Wang, Jibin Pu, Tiedan Chen, Haobo Zhang, (State Key Laboratory of Solid Lubricants – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences,Gansu University of Traditional Chinese Medicine)
https://link.springer.com/article/10.1007/s11249-013-0266-zIn Situ Fabrication of Low-Friction Sandwich Sheets Through Functionalized Graphene Crosslinked by Ionic Liquids
Xiaoqiang Fan, Liping Wang, Wen Li, (State Key Laboratory of Solid Lubricants – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-015-0485-6An Investigation on the Friction and Wear Properties of Perfluorooctane Sulfonate Ionic Liquids
Mingjin Fan, Chaoyang Zhang, Yaning Gio, Renrui Zhang, Libin Lin, Desuo Yang, Feng Zhou, Weimin Liu, (Shaanxi Key Laboratory of Phytochemistry – College of Chemistry & Chemical Engineering - Baoji University of Arts and Sciences,State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,The Middle School Attached to Northwestern Polytechnical University)
https://link.springer.com/article/10.1007/s11249-016-0698-3Tribological Performance of Halogen-Free Ionic Liquids as Lubricants of Hard Coatings and Ceramics
Yuriko Kondo, Takahiro Koyama, Ryo Tsuhoi, Miki Nakano, Koji Miyake, Shinya Sasaki, (Tokyo University of Science,AIST)
https://link.springer.com/article/10.1007/s11249-013-0159-1Crown-Type Ionic Liquids as Lubricants for Steel-on-Steel System
Dong Jiang, Litian Hu, Dapeng Feng, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-010-9726-xInfluence of Competitive Adsorption on Lubricating Property of Phosphonate Ionic Liquid Additives in PEG
Yunyan Han, Dan Qiao, Yuexia Guo, Dapeng Feng, Lei Shi, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-016-0749-9Alkyl Imidazolium Ionic Liquids as Friction Reduction and Anti-Wear Additive in Polyurea Grease for Steel/Steel Contacts
Meirong Cai, Zhu Zhao, Yongmin Liang, Feng Zhou, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate School of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-010-9624-2Preparation of High-Temperature Lubricants by Blending Castor Oil with Lithium Bis(trifluoromethylsulfonyl)imide
Xinhu Wu, Gaiqing Zhao, Xiaobo Wang, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-017-0833-9Effect of tetraalkylphosphonium based ionic liquids as lubricants on the tribological performance of a steel-on-steel system
LiJun Weng, XuQing Liu, YongMin Liang, QunJi Xue, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate University Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-006-9175-8Lithium-Based Ionic Liquids: In Situ-Formed Lubricant Additive Only by Blending
Zenghong Song, Mingjin Fan, Yongmin Liang, Feng Zhou, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate School of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-012-0046-1Green Ionic Liquid Lubricants Prepared from Anti-Inflammatory Drug
Zenghong Song, Qianling Yu, Meirong Cai, Guowei Huang, Meihuan Yao, Dongmei Li, Yongmin Liang, Mingjin Fan, Feng Zhou, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences,Henan Normal University)
https://link.springer.com/article/10.1007/s11249-015-0611-5Non-corrosive and Biomaterials Protic Ionic Liquids with High Lubricating Performance
Yijun Shi, Roland Larsson, (Division of Machine Elements – Lulea University of Technology)
https://link.springer.com/article/10.1007/s11249-016-0692-9Tribological Performance and Mechanism of Phosphate Ionic Liquids as Additives in Three Base Oils for Steel-on-aluminum Contact
Dan Qiao, Haizhong Wang, Dapeng Feng, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate School of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-014-0377-1Tribological performance of room-temperature ionic liquids as lubricant
Weimin Liu, Chengfeng Ye, Qingye Gong, Haizhong Wang, Peng Wang, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences)
https://link.springer.com/article/10.1023/A:1020148514877Ibuprofen-Based Ionic Liquids as Additives for Enhancing the Lubricity and Antiwear of Water-Ethylene Glycol Liquid
Yuring Wang, Qiangliang Yu, Meirong Cai, Lei Shi, Feng Zhou, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-017-0840-xGold-ionic liquid nanofluids with preferably tribological properties and thermal conductivity
Baogang Wang, Xiaobo Wang, Wening Lou, Jingcheng Hao, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Key Laboratory of Colloid and Interface Chemistry – Shandong University – Ministry of Education,Graduate School of Chinese Academy of Sciences)
https://link.springer.com/article/10.1186/1556-276X-6-259Lubrication Mechanism of Phosphonium Phosphate Ionic Liquid Additive in Alkylborane-Imidazole Complexes
Vladimir Totolin, Ichiro Minami, Christoph Gabler, Joseph Brenner, Nicole Dörr, (AC2T research GmbH,Division of Machine Elements – Lulea University of Technology,Department of Chemical Engineering – Iwate University)
https://link.springer.com/article/10.1007/s11249-013-0281-0Lithium-based ionic liquids as novel lubricant additives for multiply alkylated cyclopentanes (MACs)
Zhenghong Song, Yongmin Liang, Feng Zhou, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s40544-013-0019-xCapacity of selected ionic liquids as alternative EP-AW additive
A. Schneider, J. Brenner, C. Tomastik, N. Dörr, F. Franek, (AC2T research GmbH)
https://onlinelibrary.wiley.com/doi/10.1002/ls.120Conductivity and Tribological Performances of Ionic Liquid as Base Oil of Greases
WANG Guogang, ZHAO Yueju, SHU Zongying, XIA Yanqio, WU Hao, (Beijing Guodian Futong Science and Technology Development Co., Ltd.,School of Energy and Mechanical Engineering – North China Electric Power University)
https://link.springer.com/article/10.1007/s11249-013-0266-zTibological Behavior of Si3N4/Ti3SiC2 Contacts Lubricated by Lithium-Based Ionic Liquids
Haizhong Wang, Dapeng Fang, Zenghong Song, Dan Qiao, Jinjun Lu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,University of Cinese Academy of Sciences,College of Chemistry and Materials Science – Northwest University)
https://onlinelibrary.wiley.com/doi/10.1155/2014/863230
16. FAHRZEUGTECHNIK - AUTOMOTIVE TECHNOLOGY
Bench Performance Test Methods For Lubricated Engine Materials
P. Blau, S. C.Y. Tung, (Oak Ridge National Laboratory, USA,Industrial Technology Research Institute (ITRI), Taiwan, R.O.C.)
https://asmedigitalcollection.asme.org/astm-ebooks/book/640/chapter-abstract/27757861/Bench-Performance-Test-Methods-for-Lubricated?redirectedFrom=fulltextA Test Method for Evaluating Material Combinations of Automotive Camshaft and Follower Components Subjected to Lubricated Sliding Simulating Variable Valve Actuation
Simon C. Tung, Angelo Quintana, Shekhar G. Wakade, Edward Becker, Steven White, (General Motors Research and Development Center,General Motors Powertrain,University of Michigan)
https://www.sae.org/publications/technical-papers/content/2007-01-1970/Friction and wear performances of brake material dry sliding against a composite with a semi-interpenetrating network structure of ceramics and Al-alloy
S.Y. Zhang, S.S. Feng, (Department of Materials Science and Engineering – School of Physics and Electrical Engineering – Taizhou University)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X10002720
17. SCHICHTEN - LAYERS
Tribological interactions between DLC coatings and lubricants
A. Podgornik, J. Vizintin, S. Strnad, K. Stana-Kleinschek, (University of Ljubljana,University of Maribor)
https://onlinelibrary.wiley.com/doi/10.1002/tt.45Improved mixed and boundary lubrication with glycerol-diamond technology
M. I. De Barros Bouchet, C. Matta, Th. Le-Mogne, J. Michel Martin, T. Sagawa, S. Okuda, M. Kano, (Laboratory of Tribology and System Dynamics, Ecole Centrale de Lyon,Nissan Motor Co. Ltd.)
https://www.tandfonline.com/doi/abs/10.1179/175158407X181507Enhanced Sliding Wear Resistance of Technical Alloys by Hard Particle Reinforcement Using Machine Hammering
Manel Rodríguez Ripoll, Franz Heindl, Christoph Lechner, Vladimir Totolin, Martin Jech, Friedrich Bleicher, (AC2T research GmbH,Institute for Production Engineering and Laser Technology – Technical University of Vienna)
https://www.tandfonline.com/doi/full/10.1080/10402004.2016.1178828Improvement of the Oxidation and Wear Resistance of Pure Ti by Laser-Cladding Ti3Al Coating at Elevated Temperature
Chun Guo, Jiansong Zhou, Jierong Zhao, Lingqian Wang, Youjun Yu, Jianmin Chen, Huidi Zhou, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences)
https://www.sciencedirect.com/science/article/abs/pii/S0257897210007826Tribological Performance of Fe67B33 Alloy Prepared by a Self-Propagating High-Temperature Synthesis Technique
Licai Fu, Jun Yang, Qinling Bi, Jiqiang Ma, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-009-9488-5Dry-sliding Tribological Properties of Nano-Eutectic Fe83B17 Alloy
Licai Fu, Jun Yang, Qinling Bi, Shengyu Zhu, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-009-9422-xEvaluation of Anti-Adhesion Characteristics of Diamond-LikeCarbon Film by Combining Friction and Wear Test with StepLoading and Weibull Analysis
Hiroki Mano, Tsuguyori Ohana, (Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology (AIST))
https://pubmed.ncbi.nlm.nih.gov/34067479/Ultralow friction of DLC in presence of glycerol mono-oleate (GMO)
M. Kano, Y. Yasuda, Y. Okamoto, Y. Mabuchi, T. Hamada, T. Ueno, J. Ye, S. Konishi, S. Takeshima, J.M. Martin, M.I. De Barros Bouchet, T. Le Mogne, (Materials Research Laboratory – Nissan Motor Co. Ltd,Nissan Arc Ltd,Nippon Oil Corporation,Laboratory of Tribology and System Dynamics – Ecole Centrale de Lyon)
https://link.springer.com/article/10.1007/s11249-004-2749-4Reciprocating Sliding Friction and Wear Property of Fe3Si Based Alloys Containing Cu in Water Lubrication
Jiangang Jia, Qin Ma, Jinjun Lu, Bo Wang, (State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials – Lanzhou University of Technology,State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-008-9318-1Sliding Wear of Ni-17.5Si-29.3Cr alloy under water lubrication
Q. Bi, W. Liu, J. Yang, Q. Xue, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-005-8306-yThe Tribological Behavior of Ti-46Al-2Cr-2Nb Alloy Under Liquid Paraffine Lubrication
Jun Cheng, Jun Yang, Jiqiang Ma, Qinling Bi, Xinghua Zhang, Licai Fu, Fei Li, Shengyu Zhu, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-012-9942-7Fabrication and evaluation of D-gun sprayed WC-Co coating with self-lubricating property
H. Du, C. Sun, W.G. Hua, Y.S. Zhang, Z. Han, T.G. Wang, J. Gong, S.W. Lee, (Division of Surface Engineering of Materials – Institute of Metal Research – Chinese Academy of Sciences,Shenyang National Laboratory for Materials Science – Institute of Metal Research – Chinese Academy of Sciences,Interface Engineering Laboratory – Division of Materials and Chemical Engineering – Sun Moon University)
https://link.springer.com/article/10.1007/s11249-006-9119-3Tribological Properties of a Nano-Eutectic Fe1.87C0.13 Alloy Under Water Environment
Lin Wang, Jun Yang, Jiqiang Ma, Qinling Bi, Licai Fu, Junying Hao, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-010-9644-yThe Tribological Properties of a Nano-Eutectic Fe1.87C0.13 Alloy Under Liquid Paraffine Lubrication
Lin Wang, Jun Yang, Qinling Bi, Jiqiang Ma, Licai Fu, Weimin Liu, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences,Graduate University of Chinese Academy of Sciences)
https://link.springer.com/article/10.1007/s11249-009-9513-8Boundary Lubrication Properties of Nanoperiod Solid Lubricant Multilayer Films Composed of Diamond-Like Carbon and Gold Layers
Shojiro Miyake, Mitsuyoshi Komiya, Takanori Shindo, (Nippon Institute of Technology)
https://link.springer.com/article/10.1007/s11249-011-9909-0Tribological behavior of nanostructured Al2O3-3 wt% TiO2 coating against steel in dry sliding
Xinhua Lin, Yi Zeng, Chuanxian Ding, Pingyu Zhang, (Shanghai Institute of Ceramics – Chinese Academy of Sciences,Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences)
https://link.springer.com/article/10.1023/B:TRIL.0000017414.32058.f7Tribological Behaviour of Electroless NiP Coatings with an Extreme Pressure Additive: Synergistic or Antagonistic?
Balasubramaniam Vengudusamy, Karolina Jablonka, Alexander Grafl, Wolfgang Siegert, (AC2T research GmbH,Collini Wien GmbH)
https://link.springer.com/article/10.1007/s11249-016-0675-xInfluence of Silicon on the Wear Properties of Amorphous Carbon Under Dry and Lubricated Conditions
Balasubramaniam Vengudusamy, Alexander Grafl, Klaus Preinfalk, (AC2T research GmbH,Miba Coating Group, High Tech Coatings GmbH)
https://link.springer.com/article/10.1007/s11249-014-0295-2Evaluation of anti-adhesion characteristics of diamond-like carbon film using high-frequency, linear-oscillation tribometer
Hiroki Mano, Tsuguyori Ohana, (National Institute of Advanced Industrial Science and Technology (AIST))
https://www.mdpi.com/1996-1944/14/11/2746Tribological properties of lubricated nanocrystalline diamond surfaces for various loads and geometries
A. Schneider, J. Brenner, D. Steinmüller-Nethl, M. Roy, F. Franek, (AC2T research GmbH)
https://www.tandfonline.com/doi/abs/10.1179/175158309X12586382418490Enhanced Tribological Performances of Nanocrystalline Diamond Film
A. Schneider, D. Steinmüller-Nethl, M. Roy, F. Franek, (AC2T research GmbH)
https://sciencedirect.com/science/article/abs/pii/S0263436809001000Microstructure and Wear Resistance of Laser Cladding NiCoCrAlY/HfB2 Coating at Elevated Temperature
HU Ze-xiang, LIU Jie-rui, GUO Chun, ZHOU Jian-song, ZHANG Shi-tang, (The PLA 92117 Troops, Beijing,School of Materials Science and Engineering – Central South University,Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences)
https://www.sciencedirect.com/science/article/abs/pii/S1875537213600879Mechanical Behavior and Sliding Wear Studies on Iron Aluminide Coatings Reinforced with Titanium Carbide
Mahdi Amiriyan, Carl Blais, Houshang D. Alamdari, Sylvio Savoie, Robert Schulz, Mario Gariépy, (Département de génie des mines, de la métallurgie et des matériaux – Université Laval,Aluminium Research Center-REGAL,Hydro-Quebec Research Institute,Wärtsilä Canada Incorporated)
https://www.mdpi.com/2075-4701/7/5/177Mechano-chemical decomposition of organic friction modifiers with multiple reactive centres induces superlubricity of ta-C
Takuya Kuwahara, Pedro A. Romero, Gianpietro Moras, Stefan Makowski, Volker Weihnacht, Michael Moseler, (Fraunhofer Institute for Mechanics of Materials IWM,Fraunhofer Institute for Material and Beam Technology IWS,Freiburg Materials Research Center)
https://www.nature.com/articles/s41467-018-08042-8Tribofilm formation of a-C:H coatings under influence of temperature in boundary lubricated oscillating sliding agaist alumina and silicon nitride
R. Wäsche, A.R. Jayachandran, G. Brandt, T. Schmid, T. Tamura, T. Nakase, (Bundesanstalt für Materialforschung und -prüfung (BAM),KYB Corporation)
https://elibrary.utb.de/doi/abs/10.5555/tus201850028Tribological Behavior of CrN Coatings Deposited by Raams under Lubricated Reciprocating Ring on Plane Condition
N.K. Fukumasu, R.M. Souza, G. Kamath, (Polytechnique School – University of Sao Paulo,Vapor Technologies Inc)
https://leeds-lyon2019.sciencesconf.org/259808/Abstract_LL2019_NKF_RMS_NKF.pdfFrequency-Modulation Atomic Force Microscopic Observation for Ultralow Frictional Solid–Liquid Interface of Diamond-Like Carbon in an Environmentally Friendly Oil
Hikaru Okubo, Shinya Sasaki, (Graduate School, Tokyo University of Science,Tokyo University of Science)
https://link.springer.com/article/10.1007/s11249-018-1105-zMicrostructures and high-temperature self-lubricating wear-resistance mechanisms of graphene-modified WC–12Co coatings
Haoliang TIAN, Changliang WANG, Mengqiu GUO, Yongjing CUI, Junguo GAO, Zhihui TANG, (Aviation Key Laboratory of Science and Technology on Advanced Corrosion and Protection for Aviation Material Beijing, Aero Engine Corporation of China Beijing Institute of Aeronautical Materials)
https://link.springer.com/article/10.1007/s40544-019-0346-7Microstructures and high-temperature self-lubricating wear-resistance mechanisms of graphene-modified WC–12Co coatings
Haoliang TIAN, Changliang WANG, Mengqiu GUO, Yongjing CUI, Junguo GAO, Zhihui TANG, (Aviation Key Laboratory of Science and Technology on Advanced Corrosion and Protection for Aviation Material Beijing, Aero Engine Corporation of China Beijing Institute of Aeronautical Materials)
https://link.springer.com/article/10.1007/s40544-019-0346-7The Tribological Performance of Metal-/Resin-Impregnated Graphite under Harsh Condition
Jun Zhao, Yijiang Liu, Dengyu Liu, Yanfei Gu, Rao Zheng, Runmei Ma, Shuangxi Li, Yongfu Wang, Yijun Shi, (College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology,State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology,Division of Machine Elements, Luleå University of Technology,State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences)
https://www.mdpi.com/2075-4442/10/1/2Ultralow friction of tetrahedral amorphous carbon (ta-C) film in environmentally friendly ester-based oils
Hikaru Okubo, Chiharu Tadokoro, Shinya Sasaki, (Graduate School, Tokyo University of Science,Tokyo University of Science)
https://www.jstage.jst.go.jp/article/trol/11/2/11_102/_articleEffects of alkyl groups of zinc dialkyldithiophosphates (ZDDPs) on tribological properties of tetrahedral amorphous carbon (ta-C) films under boundary lubrication
Hikaru Okubo, Chiharu Tadokoro, Shinya Sasaki, (Graduate School, Tokyo University of Science,Tokyo University of Science)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X16001109The Behavior of TiAlN and TiAlCrSiN Films in Abrasive and Adhesive Tribological Contacts
Wadim Schulz, Vitalij Joukov, Florian Köhn, Wolfgang Engelhart, Veit Schier, Tim Schubert, Joachim Albrecht,
https://www.mdpi.com/2079-6412/13/9/1603Properties of Wear-Resistant MoN Films on Microengineered Substrates
Wadim Schulz, Florian Köhn, Martin Balzer, Martin Fenker, Joachim Albrecht,
https://www.mdpi.com/2079-6412/12/9/1232Controlling Friction and Wear with Anisotropic Microstructures in MoN‑Coated Surfaces
Wadim Schulz, Florian Köhn, Martin Balzer, Martin Fenker, Joachim Albrecht,
https://link.springer.com/article/10.1007/s11249-021-01531-wSolid Lubrication Performance of Hybrid Ti3C2Tx/MoS2 Coatings
Guido Boidi, Dario Zambrano, (AC²T)
https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4731458
18. FETTE - GREASES
Tribological Behaviour of Additive Free Calcium Stearate Greases
N. Anandan, C.R. Jagga, R.K. Pandey, (Industrial Tribology, Machine Dynamics and Maintenance Engineering Centre (ITMMEC), Indian Institute of Technology, New Delhi, India)
https://www.jstage.jst.go.jp/article/trol/2/1/2_1_34/_pdf/-char/enDevelopment and Performance Study of Heavy Duty Additive Free Lubricating Greases
N. Anandan, C.R. Jagga, R.K. Pandey, (Industrial Tribology, Machine Dynamics and Maintenance Engineering Centre (ITMMEC), India)
https://www.researchgate.net/publication/268799986_Development_of_heavy_duty_additive_free_lubricating_greasesEffect of Cu Nanoparticles on the Tribological Performance of Attapulgite Base Grease
Feng Nan, Yi Xu, Binshi Xu, Fei Gao, Yixiong Wu, Zhuguo Li, (Shanghai Key Laboratory of Laser Processing and Materials Modification – Shanghai Jiaotong University, China,National Key Laboratory for Remanufacturing, China,State Key Laboratory of Polymer Physics and Chemistry – Institute of Chemistry – Chinese Academy of Sciences, China)
https://www.tandfonline.com/doi/full/10.1080/10402004.2015.1035415The rheological and tribological properties of calcium sulfonate complex grease
Zeyun Wang, Yanqiu Xia, Zhilu Liu, (School of Chemistry and Chemical Engineering – Ningxia University, China,State Key Laboratory of Solid Lubrication - Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,School of Energy Power and Mechanical Engineering – North China Electric Power University, China)
https://link.springer.com/article/10.1007/s40544-014-0063-1Tribological Performance of Lubricating Greases Based on Calcium Carbonate Polymorphs Under the Boundary Lubrication Condition
Dabo Liu, Gaiqing Zhao, Xiaobo Wang, (State Key Laboratory of Solid Lubrication - Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,Graduate University of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-012-9976-xConductive Lubricating Grease Synthesized Using the Ionic Liquid
Zeyun Wang, Yanqiu Xia, Zhilu Liu, Zhenzhong Wen, (State Key Laboratory of Solid Lubrication - Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,Graduate School of Chinese Academy of Sciences, China,School of Energy Power and Mechanical Engineering – North China Electric Power University, China)
https://link.springer.com/article/10.1007/s11249-012-9915-xPolypropylene – A novel thickener technology with many surprises
Johan Leckner, René Westbroek, (Axel Christiernsson International AB, Sweden)
https://cdn2.hubspot.net/hubfs/515485/redesign-jul-2016/downloads/Polypropylene%20%E2%80%93%20A%20novel%20thickener%20technology%20PAPER.pdfElbow Grease: The work behind the Art
Joe Kaperick, (Afton Chemical, USA)
https://www.proquest.com/docview/1152078392?fromopenview=true&pq-origsite=gscholar&sourcetype=Scholarly%20JournalsProbing the effect of thickener on tribological properties of lubricating greases
Xiaoqiang Fan, Wen Li, Hao Li, Minhao Zhu, Yanqiu Xia, Junjun Wang, (Key Laboratory of Advanced Technologies of Materials (Ministry of Education) – School of Materials Science and Engineering – Southwest Jiaotong University, China,Tribology Research Institute – Key State Laboratory of Traction Power – Southwest Jiaotong University, China,School of Energy Power and Mechanical Engineering – North China Electric Power University, China,College of Materials Science and Engineering – Chongqing University of Technology, China)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X17304401Evaluation of High Performance Lubricating Greases on the Translatory Oscillation Tribometer (SRV®)
Gregor Patzer, (Optimol Instruments Prüftechnik GmbH, Germany)
https://asmedigitalcollection.asme.org/materialsperformance/article-abstract/7/3/340/1186683/Evaluation-of-High-Performance-Lubricating-Greases?redirectedFrom=fulltextEvaluation of the Impact of High Viscosity Naphthenic Oils in Various Thickener Systems
Mehdi Fathi-Najafi, Jinxia Li, Yijun Shi, (Nynas AB, Sweden,Luleå University of Technology, Sweden)
https://www.nlgi.org/downloads/evaluation-of-the-impact-of-high-viscosity-naphthenic-oils-on-various-thickener-systems/A Study of Grease Lubricants under Wind Turbine Pitch Bearing Conditions
Fabian Schwack, Norbert Bader, Johan Leckner, Claire Demaille, Gerhard Poll, (Leibniz University Hannover – Institute of Machine Design and Tribology, Germany,Axel Christiernsson International, Nol, Sweden)
https://www.sciencedirect.com/science/article/pii/S0043164819318514Grease Degradation in Constant Velocity (CV) Joints
Chul-Hee Lee, Jae Young Choi, In Sik Jeon, Wonoh Cho, Hyukchae Yun, (Department of Mechanical Engineering – Inha University, Incheon, Korea,R&D Center – Chang Am LS Co., Asan-City, Korea)
https://www.tandfonline.com/doi/full/10.1080/10402004.2011.606958Pristine, Reduced, and Alkylated Graphene Oxide as Additives to Paraffin Grease for Enhancement of Tribological Properties
Sooraj Singh Rawat, A.P. Harsha, O.P. Khatri, Rolf Wäsche, (Indian Institute of Technology, India,CSR Indian Institute of Petroleum, India,Federal Institute for Materials Research and Testing (BAM), Germany)
https://asmedigitalcollection.asme.org/tribology/article-abstract/143/2/021903/1085942/Pristine-Reduced-and-Alkylated-Graphene-Oxide-as?redirectedFrom=fulltextInfluence of Interstitial Oxygen on the Tribology of Ti6Al4V
Daniel Kümmel, Johannes Schneider, Peter Gumbsch, (Institute for Applied Materials IAM, Karlsruhe Institute of Technology KIT, Karlsruhe, Germany,Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany,MicroTribology Center μTC, Karlsruhe, Germany)
https://link.springer.com/article/10.1007/s11249-020-01327-4The Impact of Viscosity of Naphthenic Oils and Extreme-Pressure Additives on Lubricating Greases
Mehdi Fathi-Najafi, Ameneh Schneider, Junxia Li, (Nynas AB, Sweden,Optimol Instruments Prüftechnik GmbH, Germany)
https://www.lube-media.com/wp-content/uploads/Lube-Tech-136-The-impact-of-viscosity-of-naphthenic-oils-and-extremepressure-additives-on-lubricating-greases-min.pdfNLGI’s NEW High-Performance Multiuse (HPM) Grease Specifications – Development Details
Joe Kaperick, Chuck Coe, (Afton Chemical, USA,Grease Technology Solutions, LLC)
https://nlgi.org/wp-content/uploads/2020/11/STLE-CFM.pdfEvaluation of the Interaction, Rheological and Tribological Properties of Bis(pinacolato)diboron with Lithium Grease
J. Ren, K. L. Gong, G. Q. Zhao, X. H. Wu, X. B. Wang, (China)
https://link.springer.com/article/10.1007/s11249-021-01521-y
19. TRIBOCHEMIE - TRIBOCHEMISTRY
Interaction of EP additives with W- or Mo-based carbide and nitride coatings and their in-situ related formation of a low friction tribofilm
B. Kohlhauser, M. Rodríguez Ripoll, H. Riedl, C. Gachot, P.H. Mayrhofer, (Institute of materials Science and Technology – TU Wien, Austria,AC2T research GmbH, Austria,Institute for Engineering Design and Logistics Engineering)
https://repositum.tuwien.at/handle/20.500.12708/94723Tribochemistry of Fluorinated Fluids Hydroxyl Groups on Steel and Aluminum Surfaces
Marcin Przedlacki, Czeslaw Kajdas, (Warsaw University of Technology – Institute of Chemistry in Plock, Poland,Central Petroleum Laboratory, Poland,Austrian Center of Competence for Tribology, Austria)
https://www.tandfonline.com/doi/full/10.1080/05698190500544676Severe-to-mild wear transition during running-in of different steel-on-steel tribosystems in ball-on-disc dry sliding reciprocating tests
Pablo Alejandro Correa Saldarriaga, (University of Sao Paulo, Brazil)
https://www.teses.usp.br/teses/disponiveis/3/3151/tde-28082018-075415/pt-br.phpCorrelation Between Engine Oil Degradation, Tribochemistry, and Tribological Behavior with Focus on ZDDP Deterioration
Nicole Dörr, Josef Brenner, Andjelka Ristić, Bettina Ronai, Charlotte Besser, Vladimir Pejaković, Marcella Frauscher, (AC2T research GmbH)
https://link.springer.com/article/10.1007/s11249-019-1176-5Influence of Artificially Altered Engine Oil on Tribofilm Formation and Wear Behaviour of Grey Cast Cylinder Liners
Martin Jech, Alexander Hofer, Christian Tomastik, Thomas Wopelka, (AC²T)
https://www.mdpi.com/2075-4442/11/11/476
20. TRIBO-KORROSION - TRIBO-CORROSION
Effects of Load on Fretting Wear Behaviors of 304 Stainless Steels
FAN Na, WANG Yunxia, WANG Quifeng, YAN Fengyuan, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Phyics – Chinese Academy of Sciences, China,University of Chinese Academy of Sciences, China)
https://www.tribology.com.cn/en/article/doi/10.16078/j.tribology.2016.05.004Tribocorrosion on Mars
Javier Martin-Torres, Maria-Paz Zorzano, Erik Nyberg, Abhilash Vakkada-Ramachandran, Anshuman Bhardwaj, (School of Geosciences – University of Aberdeen, UK,Instituto Andaluz de Ciencias de la Tierra, Granada, Spain,Centro de Astrobiologia, Madrid, Spain,Department of Computer Science, Electrical and Space Engineering – Luleå University of Technology, Sweden)
https://www.researchsquare.com/article/rs-36280/v1Galvanically induces potentials to enable minimal tribochemical wear of stainless steel lubricated with sodium chloride and ionic liquid aqueous solution
Tobias Amann, Natalie Oberle, Andreas Kailer, Felix Gatti, Jürgen Rühe, (Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany,Institute for Macromolecular Chemistry – University of Freiburg, Germany,IMTEK – Department of Microsystems Engineering – University of Freiburg, Germany)
https://link.springer.com/article/10.1007/s40544-017-0198-yTribocorrosive Aspects of Tungsten Carbide, Silicon Nitride, and Martensitic Steel under Fretting-like Conditions
Markus Kronberger, Josef Brenner, (AC²T research GmbH)
https://www.mdpi.com/2075-4442/11/5/195
21. TRIBOLOGIE DER KRAFTSTOFFE - FUEL TRIBOLOGY
Study on Diesel Lubricating Characteristic Based on SRV Wear Machine
WANG Jianhua, HU Zexiang, LI Jin, (The Oil Supervision Department of Navy, Beijing, China,92117 Unit of PLA, Beijing, China,Department of Application & Management Engineering – Logistics Engineering University, Chongqing, China)
http://www.rhymf.com.cn/rhymfen/article/abstract/RF20150347?st=article_issue
22. SCHMIERSTOFFE ALLGEMEIN - LUBRICANTS (GENERAL)
Structures and high temperature frictional behaviors of carbonaceous mesophases doped with metallic element nickel (Ni) through mechanical alloying
Zhang Ruijin, Su Zhibin, (Key Laboratory of Metastable Materials Science and Technology – Yansham University, China)
https://link.springer.com/article/10.1007/s11249-006-9065-0Performance Characteristics of Perfluoroalkylpolyether Synthetic Lubricants
Farshid Sadeghi, Eric J. Trope, Timothy J. Schnell, (Purdue University – School of Mechanical Engineering, IN, USA)
https://www.tandfonline.com/doi/abs/10.1080/10402009608983604Surface Treatment of Aluminium Alloy for Tribological Applications
Takuya Nakase, Kenji Sakuragi, (KYB Corporation, Japan)
https://www.kyb.co.jp/english/technical_report/data/no55e/03_technology_explanation_02.pdfSynthesis and Lubricating Property Research of Di-iso-hexadecyl Carbonate as Base Oil
WANG Qingrui, YE Feng, CUI Xiaoying, MENG Xiangyun, LIU Zhiwei, HE Liangnian, (Nankai University, China,Tianjin Nankai University Castor Engineering Science and Technology Co., Ltd., China,Nankai University Engineering Research Center for Castor, Tjianjin, China)
http://www.rhymf.com.cn/rhymfen/article/abstract/RF20150693?st=article_issueHow lubricant formulations and properties influence the performance of rotorcraft transmissions under loss of lubrication conditions
Azhaaruden Anifa Mohamed Faruck, Chia-Jui Hsu, Nicole Doerr, Michael Weigand, Carsten Gachot, (TU Wien – Institut für Konstruktionswissenschaften und Produktentwicklung (IKP) – Tribology Research Group, Vienna, Austria,AC2T Research GmbH, Wiener Neustadt, Austria)
https://www.sciencedirect.com/science/article/pii/S0301679X20302279Development of High-Service-Temperature Fluids
Chad Chichester, (Molykote® Specialty Lubricants by DuPont, USA)
https://www.dupont.de/content/dam/dupont/amer/us/en/Molykote/public/documents/en/Development-of-High-Service-Temperature-Fluids-80-8119A-01.pdfA comprehensive review of sustainable approaches for synthetic lubricant components
Jessica Pichler, Rosa Maria Eder, Charlotte Besser, Lucia Pisarova, Nicole Dörr, Martina Marchetti-Deschmann, Marcella Frauscher, (AC2T Research GmbH, Austria,Technical University of Vienna (TU Wien), Austria)
https://www.tandfonline.com/doi/full/10.1080/17518253.2023.2185547The Impact of Ammonia Fuel on Marine Engine Lubrication: An Artificial Lubricant Ageing Approach
Adam Agocs, Maria Rappo, Nicolas Obrecht, Christoph Schneidhofer, Marcella Frauscher, Charlotte Besser, (AC2T Research GmbH, Austria,Luleå University of Technology, Sweden)
https://www.mdpi.com/2075-4442/11/4/165Study on the Dispersion and Lubrication Properties of LDH in Lubricating Oil
Yong Li, Qiang Zhang, Weidong Zhou, Yongwang Huang, Jingbin Han, (Beijing University of Chemical Technology, China,Tsinghua University, China)
https://www.mdpi.com/2075-4442/11/3/147
23. HYDRAULIC OIL
Evaluation of Tribological Property for Hydraulic Fluid by Roller on Disk Test
Yukiko Naka, Masakazu Otsuka, (Japan Lubricating Oil Society)
https://www.jstage.jst.go.jp/article/trol/10/2/10_220/_articleBench Test Evaluation of Thermal Stability and Lubricity of Anti-Wear Hydraulic Oils in an Acid Atmosphere
Ho-Chieh Wong, Jin-Shang Liou, Chin-Tsan Wu, Su-Terng Chang, Chia-Soon Ku, (Chinese Petroleum Corporation – Refining and Manufacturing Research Center, Taiwan)
https://www.tandfonline.com/doi/abs/10.1080/10402000208982543Evaluation of Tribological Property for Hydraulic Fluid by Roller on Disk Test
Yukiko Naka, (Japan Lubricating Oil Society, Japan)
https://www.semanticscholar.org/paper/Evaluation-of-Tribological-Property-for-Hydraulic-Naka/6d7e114046f7c93698619f77b694a03e993fc8e8
24. SURFACE STRUCTURES
Microlubrication effect by laser-textured steel surfaces
P. Andersson, J. Koskinen, S. Varjus, Y. Gerbig, H. Haefke, S. Georgiou, B. Zhmud, W. Buss, (VIT Industrial Systems, Finland,CESM Swiss Center for Electronics and Microtechnology, Inc., Switzerland,Foundation for Research & Technology-Hellas FORTH, Greece,YKI Institute for Surface Chemistry, Sweden,Fuchs Europe Schmierstoffe GmbH, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0043164806002572?via%3DihubSurface Treatment of Aluminium Alloy for Tribological Applications
NAKASE Takuya, SAKURAGI Kenji, (KYB Co., Ltd., Japan)
https://www.kyb.co.jp/english/technical_report/data/no55e/03_technology_explanation_02.pdfTribology Performance of Surface Texturing Plunger
Songbo Wei, Hongfei Shang, Chenglong Liao, Junyuan Huang, Bairu Shi, (PetroChina Research Institute of Petroleum Exploration and Development, Beijing, China,State Key Laboratory of Tribology – Tsinghua University, Beijing, China)
https://www.mdpi.com/2313-7673/4/3/54Influence of Surface Roughness on the Tribological Behavior of Gar Oils in Steel-Steel Contacts Part I – Boundary Friction Properties
Bakasubramaniam Vengudusamy, Alexander Grafl, Franz Novotny-Farkas, Werner Schöfmann, (AC2T Research GmbH, Wiener Neustadt, Austria,OMV Refining & Marketing GmbH, Vienna, Austria,Magna Powertrain AG & Co KG, Lannach, Austria)
https://www.tandfonline.com/doi/full/10.1080/10402004.2013.868567Influence of Surface Roughness on the Tribological Behavior of Gar Oils in Steel-Steel Contacts Part II – Mixed Friction Properties
Bakasubramaniam Vengudusamy, Alexander Grafl, Franz Novotny-Farkas, Werner Schöfmann, (AC2T Research GmbH, Wiener Neustadt, Austria,OMV Refining & Marketing GmbH, Vienna, Austria,Magna Powertrain AG & Co KG, Lannach, Austria)
https://www.tandfonline.com/doi/full/10.1080/10402004.2014.884255Wear and friction performance under lubricated reciprocating tests of steel powder mixture sintered by Spark Plasma Sintering
G. Boidi, N.K. Fukumasu, I.F. Machado, (Polytechnic School – University of Sao Paulo, Brazil)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X1830032XThe Effect of Graphite Surface Texturing on the Friction Reduction in a Dry Contact
Slawomir Wos, Waldemar Koszela, Pawel Pawlus, (Rzeszow University of Technology, Poland)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X20303674
25. CONDITION MONITORING
Functional Criteria for Condition Monitoring Using Tribological Quantities
M. Woydt, A. Schneider, F. Novotny-Farkas, (Matrilub, Berlin, Germany,AC2T research GmbH, Wiener Neustadt, Austria)
https://asmedigitalcollection.asme.org/astm-ebooks/book/2241/chapter-abstract/27896805/Functional-Criteria-for-Condition-Monitoring-Using?redirectedFrom=fulltext
26. VERSCHIEDENE THEMEN - VARIOUS SUBJECTS
Unusual Lift by Shearing Mesogenic Fluids
R. Eidenschink, H. Kretzschmann, G. Konrath, M. Rombach, (Nematel,Fraunhofer-Institut Werkstoffmechanik)
https://www.tandfonline.com/doi/abs/10.1080/10587259908025606Influence of Temperature and Relative Humidity on the Friction and Wear of Unlubricated Reciprocating Sliding Steel / Steel Couples
D. Klaffke, H. Sander, M. Hartelt, (Federal Institute for Materials Research and Testing (BAM), Germany)
https://onlinelibrary.wiley.com/doi/10.1002/tt.3020100404Transient Processes in Tribology
G. Dalmaz, A.A. Lubrecht, D. Dowson, M. Priest, (Institute of Tribology, The University of Leeds, UK,Institut National des Sciences Appliquées de Lyon, France)
https://books.google.de/books/about/Transient_Processes_in_Tribology.html?id=BIEtt70piZ4C&redir_esc=yHigh-Pressure Viscosity Measurements of Vegetable Based Biodegradable Lubricant Oils up to 2.5 GPa and Tribological Characteristics
Y. Nakamura, H. Matsubo, K. Yoshizaki, H. Komiya, (Mie University, Japan,JTEKT Corporation, Osaka, Japan)
https://cir.nii.ac.jp/crid/1390001206061591168?lang=enTribological Applicability of Microemulsions – A Critical View
N. Dörr, B. Jakoby, A. Ecker, A. Pauschitz, (Austrian Center of Competence for Tribology – AC2T research GmbH, Austria)
https://repositum.tuwien.at/handle/20.500.12708/68801Superlubricity and tribochemistry of polyhydric alcohols
C. Matta, M. I. De Barros Bouchet, J. M. Martin, L. Joly-Pottuz, M. Kano, Qing Zhang, W. A. Goddard III, (Ecole Centrale de Lyon, France,INSA de Lyon, MATEIS, France,Nissan Research Center, Japan,California Institute of Technology, USA)
https://harvest.aps.org/v2/journals/articles/10.1103/PhysRevB.78.085436/fulltextBenchmark of alternative lubricants for hydraulic systems
Takuya Nakase, Mathias Woydt, Shinji Kaot, Shinya Sasaki, (Germany)
https://www.asmedigitalcollection.asme.org/astm-ebooks/book/2187/chapter-abstract/27891713/Benchmark-of-Alternative-Lubricants-for-Hydraulic?redirectedFrom=fulltextSome Selected Tribological Basics/Fundamentals for Practical Applications – Characterisation and Simulation of Tribo-contacts
Friedrich Franek, Nicole Dörr, András Vernes, Christian Katsich, Andreas Trausmuth, (AC2T research GmbH, Austria)
https://repositum.tuwien.at/handle/20.500.12708/74322Tribological Properties of Different Materials Treated with Machine Hammer Peening Technology for Incorporation of Hard Particles
Franz Heindl, Manel Rodríguez Ripoll, Martin Jech, Christoph Lechner, Friedrich Bleicher, (AC2T research GmbH,Vienna University of Technology)
https://repositum.tuwien.at/handle/20.500.12708/93973Improving the Tribological Properties of functional Surfaces using Machine Hammering Peening
Manel Rodríguez Ripoll, Franz Heindl, Martin Jech, B. Lechner, C Habersohn, F. Bleicher, B. Adjassoho, E. Kozeschnik, S. Gössinger, C. Bauer, (AC2T research GmbH,Vienna University of Technology)
https://www.sciencedirect.com/science/article/abs/pii/S0007850613000449Investigations of the Sliding and Wear Behaviour in Various Gaseous Atmospheres Using a SRV Testing Apparatus
Florian Ausserer, Stefan Klien, Dr. Igor Velkavrh, Alexander Diem, Pierre Forêt, (V-Research GmbH,Linde AG)
https://www.researchgate.net/publication/316697917_Investigations_of_the_sliding_and_wear_behaviour_in_various_gaseous_atmospheres_using_a_SRV_testing_apparatusTribological Properties and Film Formation Behavior of Thermoreversible Gel Lubricants
Nobuyoshi Ohno, Sobahan Mia, Kazuo Masuhara, Kentaro Sonoda, Yuji Yamashita, Yoshitaka Tamura, Shigeki Morita, Yuji Shitara, (Department of Mechanical Engineering – Saga University, Japan,Lubricants Research & Development Center – Japan Energy Corporation)
https://www.tandfonline.com/doi/full/10.1080/10402001003739936On the Lubricating Properties of Mineral Oil with Certain Inorganic Phosphates, Hydroxides, and Sulfides
J. Gansheimer, (Dow Corning Corporation, USA)
https://www.tandfonline.com/doi/abs/10.1080/05698197208981417Tribo-investigation on PTFE lubricated PEEK in harsh operating conditions
Babu Lal, Sarfaraz Alam, G.N. Mathur, (Polymer Science Division – Defense Research and Development Establishment, India)
https://link.springer.com/article/10.1007/s11249-006-9158-9Analysis of Nanoscale Wear Particles from Lubricated Steel-Steel Contacts
Rolf Wäsche, Manfred Hartelt, Vasile-Dan Hodoroaba, (BAM Federal Institute for Materials Research and Testing, Germany)
https://link.springer.com/article/10.1007/s11249-015-0534-1The Influence of Slide-Roll Ration on ZDDP Tribofilm Formation
Yasunori Shimizu, Hugh A. Spikes, (Tribology Group – Department of Mechanical Engineering – Imperial College London, UK,Lubricants Research Laboratory – Idemitsu Kosan Co. Ltd., Japan)
https://link.springer.com/article/10.1007/s11249-016-0738-zSeeing the Interface: How realistic is the Picture?
Nancy McGuire, (Tribology & Lubrication Technology, STLE Magazine, USA)
https://www.ulprospector.com/en/eu/Lubricants/Detail/3221/583147/Seeing-the-Interface-How-Realistic-is-the-PictureSupramolecular Gel Lubricants Based in Amino Acid Derivative Gelators
Qiangliang Yu, Dongmei Li, Meirong Cai, Feng Zhou, Weimin Liu, (State Key Laboratory of Sold Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,University of Chinese Academy of Sciences, China)
https://link.springer.com/article/10.1007/s11249-015-0634-yFrictional Property with 3D Capillary Structured Surface By Selective Laser Melting
H. Maeda, K. Itagaki, H. Okubo, Y. Hirata, S. Sasaki, (Department of Mechanical Engineering, Graduate School of Tokyo University of Science, Japan)
https://leeds-lyon2017.sciencesconf.org/140507/leeds_lyon_abstract.pdfInfluence of relative humidity on wear of self-mated 100Cr6 steel
Manuel Reichelt, Brunero Cappella, (Federal Institute for Material Research and Testing (BAM), Berlin, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0043164819317387Influence of Ink Composition on Tribological Properties of Ballpoint Pen
Mariko Isokane, Chiharu Tadokoro, Shinya Sasaki, Braham Prakash, (Department of Mechanical Engineering – Graduate School of Tokyo University of Science, Japan,Department of Mechanical Engineering – Saitama University, Japan,Department of Engineering Science and Mathematics – Faculty of Engineering, Luleå University of Technology, Sweden)
https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1180536&dswid=-1176A Review of Ultrasonic Reflectometry for the Physical Characterization of Lubricated Tribological Contacts: History, Methods, Devices, and Technological Trends
M. Schirru, M. Varga,
https://link.springer.com/article/10.1007/s11249-022-01670-8Harnessing nano oil reservoir network for generating low frictionand wear in self-mating alumina
Sriharitha Rowthua, Pushkar Deshpande, Adithyan Annamalai, Patrik Hoffmann, (Materials Engineering, Indian Institute of Technology (IIT) Gandhinagar, Gujarat & India,Laboratory for Advanced Materials Processing, Empa, Swiss Federal Laboratories for Materials Science and Technology, Thun, Switzerland)
https://www.sciencedirect.com/science/article/pii/S0264127521003749Tribological Compatibility of Some Selected Pb-Free Engine Bearing Materials with Different Engine Oil Formulations
Daniel W. Gebretsadik, Jens Hardell, Christoph Gabler, Braham Prakash, (Department of Engineering Sciences and Mathematics, Division of Machine Elements, Luleå University of Technology, Sweden,Austrian Excellence Center for Tribology (AC2T), Vienna, Austria)
https://www.researchgate.net/publication/326409849_Tribological_Compatibility_of_Some_Selected_Pb-Free_Engine_Bearing_Materials_with_Different_Engine_Oil_FormulationsCharacterization of lubricants for metal forming by means of an oscillating tribo-test-rig
C. Monetti, S. Ilo, T. Lebersorger, (Austrian Center of Competence for Tribology, AC2T Research GmbH, Wiener Neustadt, Austria)
https://www.deepdyve.com/lp/sage/characterization-of-lubricants-for-metal-forming-by-means-of-an-rbBCEzyWvYWater Soluble Graphene Quantum Dots as High Performance Water Based Lubricant Additive for Steel/Steel Contact
Ruibin Qiang, Lifang Hu, Kaiming Hou, Jinqing Wang, Shengrong Yang, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China,Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, China)
https://link.springer.com/article/10.1007/s11249-019-1177-4Lube magazine
Referenzliste GfT
INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT)
Tribometrie – eine unterschätzte Wissenschaft
Markus Grebe, (Hochschule Mannheim, Kompetenzzentrum Tribologie)
https://www.researchgate.net/publication/364055401_Tribometrie_-_eine_unterschatzte_WissenschaftTribology for sustainable solutions: tribometer wear testings of the human dental care tribosystem tooth–bamboo toothbrush–toothpaste
Matthias Reiser, Patrick Beau, Gregor Patzer, Matthias Niessner, (University of Applied Sciences Munich, München, Germany,Optimol Instruments Prüftechnik GmbH, München, Germany,Beau Engineering Services, Wolfsburg, Germany)
https://libraries.escp.eu/Default/doc/edsemr/_b64_ZWRzZW1yLjEwLjExMDguSUxULjExLjIwMjIuMDMzOQ%3d%3d/tribology-for-sustainable-solutions-tribometer-wear-testings-of-the-human-dental-care-tribosystem-to?_lg=en-USEffect of Sliding on the Relation of Tribofilm Thickness and Wear
Martin Jech, Maria L. Miranda-Medina, Thomas Wopelka, Christian Tomastik, Carsten Gachot,
https://www.mdpi.com/2075-4442/11/2/72Study on the Friction Characteristics and Fatigue Life of Manganese Phosphate Coating Bearings
Lijie Hao, Yong Chen, Guangxin Li, Min Zhang,
https://www.mdpi.com/2075-4442/11/3/99Experimental study on the tribological behavior of ceramic disks for application in mixer taps under different lubrication conditions
Marlene Kristin Ziegler, Benedict Rothammer, Marcel Bartz, Sandro Wartzack, Patrick Beau, Gregor Patzer, Stephan Henzler, Max Marian, (Engineering Design, Friedrich-Alexander University Erlangen-Nuremberg, Nuremberg, Germany,Optimol Instruments Prüftechnik GmbH, München, Germany,Carl Bechem GmbH, Hagen, Germany,Pontificia Universidad Catolica de Chile, Santiago, Chile)
https://www.emerald.com/insight/content/doi/10.1108/ILT-11-2022-0339/full/html
27. 2-SCHEIBEN-PRÜFSTAND - 2-DISK TEST RIG
Slip-rolling resistance of thin films and high toughness steel substrates under high Hertzian contact pressures
Christian Scholz, Dirk Spaltmann, Mathias Woydt,
https://www.sciencedirect.com/science/article/abs/pii/S0043164811000068Höchstbelastbare Wälzkontakte mit geringer Misch-/Grenzreibungszahl
C. Scholz, D. Spaltmann, M. Woydt,
https://www.tib.eu/en/search/id/tema:TEMA20120302245/H%C3%B6chstbelastbare-W%C3%A4lzkontakte-mit-geringer-MischSlip-Rolling Resistance of Alternative Steels Under High Contact Pressures in Engine Oils
Mathias Woydt, Christian Scholz,
https://www.astm.org/stp158020140018.htmlBenchmark of thin film coatings for lubricated slip-rolling contacts
C.-A. Manier, G. Theiler, D. Spaltmann, M. Woydt, H. Ziegele,
https://www.sciencedirect.com/science/article/abs/pii/S0043164810000712Rolling Contact Fatigue Tests of Ceramics by Various Comparison of Suitability to the Evaluation of Silicon Nitrides
Wataru Kanematsu, William Mandler Jr., Charles-Alix Manier, Mathias Woydt,
https://asmedigitalcollection.asme.org/testingevaluation/article-abstract/44/3/1271/1190607/Rolling-Contact-Fatigue-Tests-of-Ceramics-by?redirectedFrom=fulltextReaktive Grenzschichten in metallischen Wälzkontakten
John Burbank, Mathias Woydt, (BAM)
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/31631High wear resistance DLC film under high pressure contact
Tetsuya Tamura, Syuhei Hosohata, Takuya Nakase, Shinji Kato, Christian Scholz, Mathias Woydt, (KYB,BAM)
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/25923Optimization of pre-conditioned cold work hardening of steel alloys for friction and wear reductions under slip-rolling contact
John Burbank, Mathias Woydt, (BAM – Federal Institute for Materials Research and Testing, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S004316481600020XReibungsminderung un Wälzkontakten durch Werkstoff- und/oder Schmierstoffkonzepte
Dr. Dirk Spaltmann, Dr.-Ing. Mathias Woydt, (BAM – Federal Institute for Materials Research and Testing, Germany)
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/year/2017/docId/41126Slip-Rolling Resistance and Load Carrying Capacity of 36NiCrMoV1-5-7 Steel
C. Scholz, M. Woydt, H. Mohrbacher, (BAM – Federal Institute for Materials Research and Testing, Germany)
https://www.asmedigitalcollection.asme.org/materialsperformance/article-abstract/3/1/371/1186497/Slip-Rolling-Resistance-and-Load-Carrying-Capacity?redirectedFrom=fulltextA review of rolling contact fatigue behavior of silicon nitride focusing on testing practices and crack propagation analysis
Wataru Kanematsu, (National Institute of Advanced Industrial Science and Technology, Japan)
https://www.sciencedirect.com/science/article/abs/pii/S0043164817314072Friction and wear reductions under slip-rolling contact through chemically reactive tribofilm generation during pre-conditioning of steel alloys
John Burbank, Mathias Woydt, (BAM – Federal Institute for Materials Research and Testing, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0043164815003385Evaluating the Repeatability of Friction and Wear Testing on a Lubricant with Dispersed Hexagonal-Boron Nitride Nanoparticles
Howard Benadé, (University of Pretoria)
https://repository.up.ac.za/handle/2263/46239Test Modes for Establishing the Tribological Profile under Slip-Rolling
Gregor Patzer, Mathias Woydt, Raj Shah, Curtis Miller, Philip Iaccarino, (Optimol Instruments Prüftechnik GmbH, Germany,Matrilub, Germany,Koehler Instrument Company, Inc., USA,Department of Materials Science and Chemical Engineering – Stony Brook University, USA)
https://www.mdpi.com/2075-4442/8/5/59Friction and wear reductions in slip-rolling steel contacts through pre-conditioned chemical tribofilms from bismuth compounds
John Burbank, Mathias Woydt, (BAM – Federal Institute for Materials Research and Testing, Germany)
https://www.sciencedirect.com/science/article/abs/pii/S0043164816300424Generation of Defined Tribofilms and Their Stability under Slip-Rolling in a 2Disk Test Rig
M. Woydt, J.-T. Burbank, D. Spaltmann, (BAM – Federal Institute for Materials Research and Testing, Germany)
https://www.asmedigitalcollection.asme.org/materialsperformance/article-abstract/7/3/213/1186668/Generation-of-Defined-Tribofilms-and-Their?redirectedFrom=fulltextInnovative 2-Disk Test Instrument to Study Friction Under Slip Rolling Conditions
Dr. Raj Shah, Mathias Woydt, (Koehler Instrument Company, USA,Matrilub, Germany)
https://www.labcompare.com/10-Featured-Articles/567541-Innovative-2-Disk-Test-Instrument-to-Study-Friction-Under-Slip-Rolling-Conditions/Slip-rolling resistant steel alloys up to P0max of 3,920 MPa
Mathias Woydt, Christian Scholz, John-Theodore Burbank, Dirk Spaltmann,
https://www.sciencedirect.com/science/article/abs/pii/S004316482100096XTribological behavior of different doped ta-C coatings for slip-rolling contacts with high hertzian contact pressure
Markus Polzer, Marcel Bartz, Benedict Rothammer,
https://www.emerald.com/insight/content/doi/10.1108/ILT-11-2022-0336/full/html
28. HOT STEAM
Wear of α-Alumina in Hot Steam up to 300°C
Rolf Wäsche, Roman Ehrke, Mathias Woydt, (BAM – Federal Institute for Materials Research and Testing, Germany)
https://paginas.fe.up.pt/~m2d/Proceedings_M2D2017/data/papers/6421.pdfWear behavior of α-alumina in hot steam at high contact pressure
Rolf Wäsche, Guido Brandt, Roman Ehrke, Gert Nolze, Thomas Schmid, Mathias Woydt, Shinya Sasaki, (BAM – Federal Institute for Materials Research and Testing, Germany,Tokyo University of Science, Japan)
https://www.sciencedirect.com/science/article/abs/pii/S0043164817315971Tribology in hot steam
M. Woydt, R. Wäsche, G. Brandt, R. Ehrke, K. Yano, S. Sasaki, (BAM Federal Institute for Materials Research and Testing, Germany,Tokyo University of Science (TUS), Japan)
https://opus4.kobv.de/opus4-bam/frontdoor/index/index/docId/42472Wear behavior of MgO stabilized zirconia in hot steam environment up to 400°C
R. Wäsche, G. Brandt, T. Schmid, M. Woydt, K. Sato, S. Sasaki, (BAM Federal Institute for Materials Research and Testing, Germany,Tokyo University of Science, Japan)
https://www.sciencedirect.com/science/article/abs/pii/S0043164819300791
29. HIGH VACUUM
Development of Advanced Perfluoropolyether Lubricants for High Vacuum Space Mechanisms
Dr. Jason T. Galary, (Nye Lubricants)
https://esmats.eu/esmatspapers/pastpapers/pdfs/2019/galary.pdfPreventing the “Brown Sugar” Lubricant Phenomenon: The Relationship Between PFPE Chemical Compositions and their Susceptibility to Lewis Acid-Catalyzed Degradation
W. Stubbs, Jason T. Galary, (Galary Nye Lubricants)
https://www.nyelubricants.com/stuff/contentmgr/files/2/ac3b3bf682b9d572c0d2e41816ae5620/files/preventing_the____brown_sugar____lubricant_phenomenon___nye_lubricants.pdfEfficacy of Lead Naphthenate for Wear Protection in High Vacuum Space Mechanisms
Jason T. Galary, (Nye Lubricants)
https://www.esmats.eu/amspapers/pastpapers/pdfs/2020/galary.pdf
30. CHAIN LUBRICANTS
31. FLUIDS
Friction coefficient of 0.05 – No longer a utopian dream for aqueous systems
Jan Zwinselman, (Lusol Chemie GmbH)
https://www.academia.edu/8789264/A_friction_coefficient_of_0_05_in_aqueous_systemsRelationship Between Ultralow Friction of Mesogenic-Like Fluids and Their Lateral Chain Length
Tobias Amann, Andreas Kailer, (Fraunhofer Institute for Mechanics of Materials IWM)
https://link.springer.com/article/10.1007/s11249-010-9692-3Ultralow Friction of Mesogenic Fluid Mixtures in Tribological Reciprocating Systems
Tobias Amann, Andreas Kailer, (Fraunhofer Institute for Mechanics of Materials IWM)
https://link.springer.com/article/10.1007/s11249-009-9527-2Lubricating Properties of Organic Phosphate Ester Aqueous Solutions
Shuhai Liu, Dan Guo, Gang Li, Hong Lei, (School of Mechanical and Electronic Engineering – University of Petroleum, China,State Key Laboratory of Tribology – Tsinghua University, China,Research Center of Nano-science and Nano-technology – Shanghai University)
https://link.springer.com/article/10.1007/s11249-009-9554-zComparative Studies on Tribological Behavior of Multiply-Alkylated Cyclopentane with other Liquid Lubricants for Various Frictional Materials
Yu-Bin Sun, Li-Tian Hu, Qun-Ji Xue, (State Key Laboratory of Solid Lubrication – Lanzhou Institute of Chemical Physics – Chinese Academy of Sciences, China,Graduate University – Chinese Academy of Sciences, China)
https://www.tandfonline.com/doi/full/10.1080/10402000902825747Advances in Silicone Copolymer Based Lubricants
Chad Chichester, Christian Kranenberg, (Dow Corning Corporation)
https://issuu.com/nlgi/docs/july_aug_2017_nlgi_spokesman/s/15156851Effective sugar-derived organic gelator for three different types of lubricant oils to improve tribological performance
Ruochong Zhang, Xuqing Liu, Zhiguang Guo, Meirong Cai, Lei Shi, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou China,University of Chinese Academy of Sciences, Beijing, China,School of Materials, University of Manchester, Oxford Road, Manchester, UK,Hubei Collaborative Innovation Centre for Advanced Organic Chemical Materials and Key Laboratory for the Green Preparation and Application of Functional Materials (Ministry of Education), Hubei University, Wuhan China)
https://link.springer.com/article/10.1007/s40544-019-0316-0
https://www.sciopen.com/article/10.1007/s40544-019-0316-0
https://doaj.org/article/552642d90934481897e1240924fa915fOn the origins of lubricity and surface cleanliness in ethanol-diesel fuel blends
Frank T. Hong, Eshan Singh, S. Mani Sarathy, (Clean Combustion Research Center, Physical Sciences and Engineering (PSE) Division, King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia)
https://www.sciencedirect.com/science/article/abs/pii/S0016236121010140MoS2 nanoparticles grown on carbon nanomaterials for lubricating oil additives
Kuiliang Gong, Wenjing Lou, Gaiqing Zhao, Xinhu Wu, Xiaobo Wang, (State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China,University of Chinese Academy of Sciences, Beijing, China,Qingdao Center of Resource Chemistry & New Materials, Qingdao, China)
https://link.springer.com/article/10.1007/s40544-020-0369-0Experimental study on the tribo-chemical smoothening process between self-mated silicon carbide in a water-lubricated surface-contact reciprocating test
Le Jin, Herbert Scheerer, Georg Andersohn, Matthias Oechsner, Dieter Hellmann, (Center for Structural Materials, Technische Universität Darmstadt, Germany,KSB, Frankenthal, Germany)
https://link.springer.com/article/10.1007/s40544-018-0219-5Investigations on the Scuffing and Wear Characteristic Performance of an Oil-Free Water-Based Lubricant for Gear Applications
Nadine Sagraloff, Karl Jakob Winkler, Thomas Tobie, Karsten Stahl, Christopher Folland, Tobias Asam, (Gear Research Centre (FZG), Technical University of Munich, 85748 Garching, Germany,Carl Bechem GmbH, Hagen, Germany)
https://www.mdpi.com/2075-4442/9/3/24Tribology behaviour of surface contact friction test with water lubricated at elevated temperatures
Le Jin, Herbert Scheerer, Georg Andersohn, Matthias Oechsner, (Zentrum für Konstruktionswerkstoffe (Staatliche Materialprüfungsanstalt Darmstadt (MPA) und Fachgebiet und Institut für Werkstoffkunde (IfW)) der Technischen Universität Darmstadt,SEC-KSB Nuclear Pumps & Valves Co., Ltd., Shanghai, China)
https://tubiblio.ulb.tu-darmstadt.de/85320/
32. FORMING OILS
Development of a Meta-Stable Semi-Synthetic Lubricant for Cold Rolling of Steel
S. N. Singh, S. Mahanti, A. K. Bhatta, R. N. Biswas, J. Bhatia, (Steel Authority of India,Balmer Lawrie)
https://onlinelibrary.wiley.com/doi/10.1002/jsl.3000060403Influence of Surface Roughness on the Tribological Behavior of Gear Oils in Steel-Steel Contacts: Part I – Boundary Friction Properties / Part II – Mixed Friction Properties
Balasubramaniam Vengudusamy, Alexander Grafl, Franz Novotny-Farkas, Werner Schöfmann, (AC2T research GmbH, Austria,OMV Refining and Marketing GmbH, Austria,Magna Powertrain AG & Co KG, Austria)
https://www.tandfonline.com/doi/full/10.1080/10402004.2013.868567
https://www.tandfonline.com/doi/full/10.1080/10402004.2014.884255Characterization of Lubricants for Metal Forming by Means of an Oscillating Tribo-Test-Rig
Ch. Monetti, S. Ilo, Th. Lebersorger, (Austrian Center of Competence for Tribology, AC2T research GmbH)
https://journals.sagepub.com/doi/10.1243/13506501JET541
https://www.deepdyve.com/lp/sage/characterization-of-lubricants-for-metal-forming-by-means-of-an-rbBCEzyWvYDevelopment of a Constitutive Model for Friction in Bulk Metal Forming
Marco Lüchinger, Igor Velkavrh, Kerstin Kern,
https://www.mdpi.com/2075-4442/6/2/42
33. GEAR OILS FOR THE AUTOMOTIVE INDUSTRY
Comparison of frictional properties of gear oils in boundary and mixed lubricated rolling-sliding and pure sliding contacts
Balasubramaniam Vengudusamy, Alexander Grafl, Franz Novotny-Farkas, Werner Schöfmann, (AC2T research GmbH, Austria,OMV Refining & Marketing GmbH, Austria,Magna Powertrain AG & Co. KG, Austria)
https://www.sciencedirect.com/science/article/abs/pii/S0301679X1300042XInfluence of temperature in the friction performance of gear oils in rolling-sliding and pure sliding contacts
Balasubramaniam Vengudusamy, Alexander Grafl, Franz Novotny-Farkas, Werner Schöfmann, (AC2T research GmbH, Austria,OMV Refining & Marketing GmbH, Austria,Magna Powertrain AG & Co. KG, Austria)
https://onlinelibrary.wiley.com/doi/10.1002/ls.1245Study of Wear Properties of Environmentally Friendly Lubricants for Gearing Applications as a Function of Film Thickness Transition
Jason T. Galary, (Nye Lubricants, Inc., Fairhaven, MA, USA)
https://asmedigitalcollection.asme.org/astm-ebooks/book/2187/chapter-abstract/27891743/Study-of-Wear-Properties-of-Environmentally?redirectedFrom=fulltextSubstitution of Inexpensive Bench Test for the FZG Scuffing Test Part I: Calculations / Part II: Oil Tests
F. Van de Velde, P. Willen, Van Geeteruyen, (University Gent,Texaco Technology)
https://www.tandfonline.com/doi/abs/10.1080/10402009908982191
https://www.tandfonline.com/doi/abs/10.1080/10402009908982192SRV Method: Lubricating Oil Screening Test for FZG
Davide Massocchi, Marco Lattuada, Steven Chatterton, Paolo Pennacchi,
https://www.mdpi.com/2075-1702/10/8/621
34. OPEN GEARS
New Biodegradable Universal Tractor Transmission Oil based on Rapeseed Oil
J. Vizintin, B. Kran, (University of Ljubljana)
https://www.semanticscholar.org/paper/A-New-Biodegradable-Universal-Tractor-Transmission-Feldin/a198dd8087000e0ec106603def1b00ee8121ea6cSynergistic lubricating effects of borate ester with heterocyclic compound
Guanquiu Shen, Zhi Zheng, Yong Wan, Yiangdong Xu, Lili Cao, Qixia Yue, Tianjian Sun, Airou Liu, (Dept. Of Chemistry, Tshingua University,Tianrun Chemical Co., Dept. Of Chemistry, Xuchang Normal College)
https://www.sciencedirect.com/science/article/abs/pii/S0043164800004920
https://www.academia.edu/83528013/Synergistic_lubricating_effects_of_borate_ester_with_heterocyclic_compound
35. CV JOINTS
Lubricating grease for a plunging type constant velocity joint in Japan
Ko Hatakeyama, (Kyodo Yushi Co. Ltd.)
https://www.nlgi.org/downloads/lubricating-grease-for-a-plunging-type-constant-velocity-joint/Grease Degradation in Constant Velocity (CV) Joints
Chul-Hee Lee, Jae Young Choi, In Sik Jeon, Wonoh Cho, Hyukchae Yun, (Department of Mechanical Engineering – Inha University, Korea,R & D Center – Chang Am LS Co., Korea)
https://www.tandfonline.com/doi/full/10.1080/10402004.2011.606958
